F5F Stay Refreshed Hardware Desktop Unusual BSODs?

Unusual BSODs?

Unusual BSODs?

J
JR_GAMER07
Posting Freak
915
08-19-2023, 10:53 AM
#1
I haven't experienced a BSOD in nearly a year, but I recently got two in about a month. From what you described, the crasher didn't trigger the BSOD from the previous month, and I'm not sure what caused the one on July 18th. I'm curious about possible fixes. The RAM is overclocked, but it's unclear why it would randomly fail—this seems odd. Could it be related to the time of year, needing GPU drivers or chipset updates? Maybe the RAM voltage is too low. 1.36V (Samsung B-DIMM) Also, BSODs seem to occur only when the system is idle or under light load. Your specs are listed, but someone might have insights. Thanks!
J
JR_GAMER07
08-19-2023, 10:53 AM #1

I haven't experienced a BSOD in nearly a year, but I recently got two in about a month. From what you described, the crasher didn't trigger the BSOD from the previous month, and I'm not sure what caused the one on July 18th. I'm curious about possible fixes. The RAM is overclocked, but it's unclear why it would randomly fail—this seems odd. Could it be related to the time of year, needing GPU drivers or chipset updates? Maybe the RAM voltage is too low. 1.36V (Samsung B-DIMM) Also, BSODs seem to occur only when the system is idle or under light load. Your specs are listed, but someone might have insights. Thanks!

T
Thumps209LV
Member
226
08-20-2023, 08:07 AM
#2
IRQ less than equal indicates an overclock issue. The silicon might have slightly degraded, leading to instability. Consider increasing your SOC voltage a bit. If automatic, adjust it manually to around 1.1v. Safe up to 1.2v for continuous use.
T
Thumps209LV
08-20-2023, 08:07 AM #2

IRQ less than equal indicates an overclock issue. The silicon might have slightly degraded, leading to instability. Consider increasing your SOC voltage a bit. If automatic, adjust it manually to around 1.1v. Safe up to 1.2v for continuous use.

B
BloodyAssassin
Junior Member
47
08-23-2023, 02:51 AM
#3
I understood the part about IRQ less than equal, but wasn't sure. Thanks for trying the SOC voltage—good luck! Should I stick with the RAM overclock for now?
B
BloodyAssassin
08-23-2023, 02:51 AM #3

I understood the part about IRQ less than equal, but wasn't sure. Thanks for trying the SOC voltage—good luck! Should I stick with the RAM overclock for now?

X
xAPPLExPIEx
Senior Member
657
08-24-2023, 04:52 PM
#4
Keep the RAM in place, raise the SOC voltage slightly.
X
xAPPLExPIEx
08-24-2023, 04:52 PM #4

Keep the RAM in place, raise the SOC voltage slightly.

Y
52
08-24-2023, 07:01 PM
#5
Alright, thanks.
Y
ySt4lk3rPvP_GG
08-24-2023, 07:01 PM #5

Alright, thanks.