F5F Stay Refreshed Hardware Desktop Unstable Boot for Zen 4 7900X Model

Unstable Boot for Zen 4 7900X Model

Unstable Boot for Zen 4 7900X Model

H
HoundLynx
Member
233
01-29-2023, 08:37 PM
#1
I recently assembled this machine around two weeks ago. It was difficult to get it to start up correctly. I slightly adjusted the CPU cooler in case it had been over-tightened earlier. I've reset the RAM several times, and everything is functioning properly now. A BIOS update was installed and it helped a lot. Still, I encounter strange startup problems. The situation is inconsistent; usually I need at least three boot attempts before it boots correctly. The first attempt often ends with the CPU debug stuck red, then it goes into safe mode, after which it boots to Windows but fails to recognize the Ethernet and keyboard. The only time it boots without issues is when it connects to a different USB port, after which the keyboard works. However, only two of ten devices appear when it normally won't show up. I'm puzzled by this pattern and the lack of consistency. Ideally, the debug indicator would cycle through VGA, CPU, DRAM, and finish with Boot. It's unclear if I've ever seen debug lights change in that sequence before. CPU model: 7900X GPU: EVGA FTW 3080 MB: X670E ASUS TUF WIFI RAM: 16*2 Trident Z5 Neo RGB DDR5-6000 CL36-36-36-96 (EXPO on) SSD: 2 TB Gen 3 Inland and 2 TB Gen 4 Inland CPU cooler: Gallahad 360 AIO PSU: Corsair 1000e
H
HoundLynx
01-29-2023, 08:37 PM #1

I recently assembled this machine around two weeks ago. It was difficult to get it to start up correctly. I slightly adjusted the CPU cooler in case it had been over-tightened earlier. I've reset the RAM several times, and everything is functioning properly now. A BIOS update was installed and it helped a lot. Still, I encounter strange startup problems. The situation is inconsistent; usually I need at least three boot attempts before it boots correctly. The first attempt often ends with the CPU debug stuck red, then it goes into safe mode, after which it boots to Windows but fails to recognize the Ethernet and keyboard. The only time it boots without issues is when it connects to a different USB port, after which the keyboard works. However, only two of ten devices appear when it normally won't show up. I'm puzzled by this pattern and the lack of consistency. Ideally, the debug indicator would cycle through VGA, CPU, DRAM, and finish with Boot. It's unclear if I've ever seen debug lights change in that sequence before. CPU model: 7900X GPU: EVGA FTW 3080 MB: X670E ASUS TUF WIFI RAM: 16*2 Trident Z5 Neo RGB DDR5-6000 CL36-36-36-96 (EXPO on) SSD: 2 TB Gen 3 Inland and 2 TB Gen 4 Inland CPU cooler: Gallahad 360 AIO PSU: Corsair 1000e

R
Ricardo_
Junior Member
43
01-29-2023, 08:37 PM
#2
The debug light cycles through various functions to verify its working, and it consistently activates on my PC.
R
Ricardo_
01-29-2023, 08:37 PM #2

The debug light cycles through various functions to verify its working, and it consistently activates on my PC.