Understanding port forwarding issues
Understanding port forwarding issues
Hi, I see you're dealing with a bit of a puzzle here. Setting up port forwarding can be tricky, especially when the router interface seems unclear. You mentioned you're trying to connect your game on Hunt Showdown to EU servers and are seeing high pings. From what you described, it sounds like you're looking for a way to route specific ports through your router. The two sections you saw—Internal Ports and External Ports—seem to be the right place to place those TCP/UDP numbers. Just make sure you match each port number with the correct box (Start or End) as indicated. If you're still unsure, double-check the IP addresses and port ranges you're using. Let me know if you want help walking through it step by step.
When protocol details aren't provided, it usually applies to both TCP and UDP. 'Start' and 'End' define the port range (inclusive). Typically, for a single port, enter it in all sections for both external and internal configurations. Many options also let you set a specific LAN client IP address so the gateway doesn't reveal the entire network.
You seem unsure about my explanation. Port forwarding works by matching an IP address directly, not by triggering a port. The first device that uses the port will handle the connection, letting you manage multiple clients one after another.
From the screenshots of the BT Hub interface, IP addresses aren’t listed for the ports that get forwarded. It’s clear it should be described as port triggering, though BT doesn’t appear to use that terminology.
Start by confirming your router's firmware is up to date, as UI updates may occur. Next, verify that the device you're directing traffic to has a static IP assigned. You can set this on the router via DCHP reservation or on the device using static IP Instructions for port forwarding. For more guidance, refer to the help page: https://help.business.bt.com/app/answers...mart-hub-2. I’ll assume you’ve checked that section. It’s likely the router supports selecting the target by hostname, or you can choose to display the IP address for manual assignment. Share the IP you used, and let me know if it doesn’t work or if you need further assistance.
The simplest approach is to assign the required internal and external ports, configure the host with your machine's IP address (make sure it's static or reserved), and then test. You'll only need different ports if you're trying to hide them, but this shouldn't be necessary here.