Unable to remove the plastic bracket on my RogStrix B650-A to install the CPU cooler.
Unable to remove the plastic bracket on my RogStrix B650-A to install the CPU cooler.
Hello everyone. I'm having trouble removing one of the plastic mounts needed to install a CPU cooler on my rog strix b650-A. The screw won't turn, and I've already damaged it while trying to unscrew. My hand has metal chips from the screw and a screwdriver, but I'm unsure what to do next. I've tried various methods like using a rubber band and applying heat, but the screw remains stuck. Any advice would be greatly appreciated.
This task will involve removing the screws, so you'll need a stripped screw removal kit. Alternatively, try using the old Dremel method to create a new slot for a flathead screwdriver. Once the screws are out, you'll need to clean and dust off any metal shavings from the board—otherwise it could get damaged. I've worked with these screws and mounts many times and never faced such tight or loose situations, especially when using the right tool from the start.
It started as a simple fix with a flathead screwdriver, then I moved to a cross. It functioned well on the other three screws of this kind. The process was tough, but it worked. Eventually, I needed to wear double rubber gloves to maintain a firm grip on the driver. I plan to carve a new slot for the flathead now since I don’t have a removal kit and might need to purchase one. Thanks!
It wasn’t a simple skip. I initially believed I was using the incorrect screwdriver bit, but once it started skipping, I realized it was a firm grip until the screw head was completely damaged after a couple of skips. I’m considering using a heated knife to melt the plastic, though I’m not sure if that would work.
Bring it to a professional or let someone with experience assist you. Cutting or heating delicate electronics is not advisable. If you used the incorrect screwdriver—such as a flathead instead of the right Philips head—it’s clear you used the wrong tool. This is why it stripped. Unless you’re certain, avoid damaging your board; having a helper remove the screws carefully is best.