Unable to exit BIOS, stuck in an endless cycle.
Unable to exit BIOS, stuck in an endless cycle.
I encountered difficulties accessing BIOS settings. The situation began after watching a YouTube tutorial suggesting adjustments to power configurations to lower latency. Steps included disabling certain performance checks, modifying power plan options, and resetting the system. However, the PC refused to boot, displaying a DRAM red light. I experimented with various fixes—clearing CMOS, removing the battery, rearranging RAM, disconnecting peripherals, and even unplugging everything. Nothing resolved the issue. Later, I attempted an update using Q-Flash, which brought me back into BIOS. Now I’m stuck in a loop where only the Gigabyte logo appears with options for BIOS access, booting, or flashing. Each time I change a setting, it fails to save; only the date and time are recorded. The NVMe with Windows remains visible in BIOS alongside all other components. My hardware is a Gigabyte x670 Gaming X AX Ryzen 9 7950x RTX 4090 build with Corsair 850W and 1TB SSD, no overclocking performed. I’ve used this configuration for three months without problems. Assistance would be greatly appreciated! Please note that English isn’t my primary language.
Failed to install Windows Media via USB; device appears to work but gets redirected back to Gigabyte settings each time.
Thanks for the update. I tried reducing the version using Q-Flash in BIOS, but it always reached 100% and kept looping when I asked to reboot. Then I used USB on the back IO to downgrade again, but the problem continued. I’m now considering a replacement since it seems like a faulty MOBO. Could another component be the issue?
This situation highlights why you shouldn't rely on random YouTube videos or install questionable programs. The content seems full of confusion, and power plans aren't related to latency issues. I'm sure it's already happened—buying a new graphics card might help. If it works again later, consider a thorough scan with a full system check, including rootkit detection. Just be careful; the software could have damaged your hardware. Ryzen Master also has similar functionality, so proceed with caution.
If you ever manage to get it working, I recommend removing the CMOS battery for at least an hour and then pressing the power button for a minimum of 30 seconds before reinserting the battery. Good luck!
It seems the guidance might have been flawed or unclear. I’d begin by swapping out the CMOS battery—it shouldn’t be inactive for such a long time unless something is wrong. Disconnect the device from power, share the update, then install a Windows USB drive.
Thanks for your response! It’s clear you found it frustrating to stick to that YouTube tutorial. Already attempted to reset the CMOS battery for over an hour and kept pressing the power button briefly. Overall, appreciates your support; a new motherboard seems like the best option right now. Any suggestions? I’m avoiding Gigabyte since I’ve had issues with them before—especially after a third time it broke my setup.
It seems there may be an issue with your BIOS. If you can boot, you can update the BIOS using a USB drive. Gigabyte boards for AMD work well, and my X570 Aorus Pro stayed reliable for three years—except during those times when liquid coolant leaked onto it or the thermal paste in the PCie slot and CPU socket needed attention.
Already attempted as mentioned before. Downgraded to an older release (about a month back) and the problems persisted. Could be a matter of my experience with Gigabyte’s boards—those graphics cards usually work smoothly without any issues, no coil complaints or overheating. Appreciate the advice!