F5F Stay Refreshed Power Users Networks Two routers?

Two routers?

Two routers?

Pages (2): 1 2 Next
G
gingabang
Junior Member
35
06-05-2016, 03:53 AM
#1
Hello! You're dealing with wireless connection problems on the upper floor. The main floor router works fine, but you can't keep it there due to fairness and signal strength. You're thinking about buying another router from a store, connecting it upstairs, and using Ethernet—want me to suggest some budget-friendly options that handle interference well?
G
gingabang
06-05-2016, 03:53 AM #1

Hello! You're dealing with wireless connection problems on the upper floor. The main floor router works fine, but you can't keep it there due to fairness and signal strength. You're thinking about buying another router from a store, connecting it upstairs, and using Ethernet—want me to suggest some budget-friendly options that handle interference well?

D
DarkStains
Member
149
06-12-2016, 08:28 AM
#2
You're considering using a range extender. Are you currently connected via 802.11a/c, 802.11b/g/n? I recommend upgrading to a stronger router and relocating it if needed.
D
DarkStains
06-12-2016, 08:28 AM #2

You're considering using a range extender. Are you currently connected via 802.11a/c, 802.11b/g/n? I recommend upgrading to a stronger router and relocating it if needed.

R
RottiePvP
Member
180
06-12-2016, 05:42 PM
#3
I think 802.11a/c is a good standard.
R
RottiePvP
06-12-2016, 05:42 PM #3

I think 802.11a/c is a good standard.

B
BattleHack
Member
156
06-13-2016, 12:13 PM
#4
I haven't tried this recently, yet you once could flash the router firmware using dd-wrt and turn it into a range extender. Most modern routers likely already include this capability.
B
BattleHack
06-13-2016, 12:13 PM #4

I haven't tried this recently, yet you once could flash the router firmware using dd-wrt and turn it into a range extender. Most modern routers likely already include this capability.

R
Raidex20
Posting Freak
751
06-13-2016, 01:15 PM
#5
Confirming 100% accuracy, believing is fine but this represents a significant gap! HUGE! PHENOMENAL! For 802.11a/c users, range issues shouldn't occur—check if your router supports 5G wireless and configure it accordingly. If needed, consider an adapter to unlock full potential. - Much faster speeds, almost complete - Excellent coverage with minimal signal loss - Packet loss isn’t an issue; pings remain intact. Just verify setup is correct for gigabit performance.
R
Raidex20
06-13-2016, 01:15 PM #5

Confirming 100% accuracy, believing is fine but this represents a significant gap! HUGE! PHENOMENAL! For 802.11a/c users, range issues shouldn't occur—check if your router supports 5G wireless and configure it accordingly. If needed, consider an adapter to unlock full potential. - Much faster speeds, almost complete - Excellent coverage with minimal signal loss - Packet loss isn’t an issue; pings remain intact. Just verify setup is correct for gigabit performance.

A
Asian_Swag2015
Junior Member
2
06-14-2016, 08:58 AM
#6
802.11ac operates at 5 gigahertz, which provides a shorter coverage area compared to 2.4 gigahertz. Higher frequency signals are more easily obstructed than those with lower frequencies.
A
Asian_Swag2015
06-14-2016, 08:58 AM #6

802.11ac operates at 5 gigahertz, which provides a shorter coverage area compared to 2.4 gigahertz. Higher frequency signals are more easily obstructed than those with lower frequencies.

C
CzarnyJakup
Member
224
06-18-2016, 06:44 PM
#7
You can configure nearly any router as an access point by turning off its DHCP service and linking it to your current network via Ethernet. Be sure not to attach the Ethernet cable to its internet connection port; instead, use a standard PC port.
C
CzarnyJakup
06-18-2016, 06:44 PM #7

You can configure nearly any router as an access point by turning off its DHCP service and linking it to your current network via Ethernet. Be sure not to attach the Ethernet cable to its internet connection port; instead, use a standard PC port.

K
KetzPlayer
Member
210
06-19-2016, 01:14 AM
#8
Good catch. I should have emphasized how less interference improves the signal, letting 5G perform better than 2.4G at home and making travel more efficient. It wasn’t clear how to put it together, but I’m winding down now.
K
KetzPlayer
06-19-2016, 01:14 AM #8

Good catch. I should have emphasized how less interference improves the signal, letting 5G perform better than 2.4G at home and making travel more efficient. It wasn’t clear how to put it together, but I’m winding down now.

M
mcraft2070
Junior Member
31
06-19-2016, 05:45 AM
#9
Signal quality improves at lower frequencies since they travel farther. 2.4GHz tends to be more interference-prone, but fine-tuning and a detailed site analysis can help it perform effectively.
M
mcraft2070
06-19-2016, 05:45 AM #9

Signal quality improves at lower frequencies since they travel farther. 2.4GHz tends to be more interference-prone, but fine-tuning and a detailed site analysis can help it perform effectively.

M
maxbox999
Junior Member
13
06-19-2016, 10:07 AM
#10
It's reasonable to assume with this coverage range that 5G would be ideal for home use. You might want to stick with it unless you need to connect many devices or access the internet from a distant location like a store. Everyone's situation is different, but converting to 5G seems like the best choice if you don't want to rely on that network.
M
maxbox999
06-19-2016, 10:07 AM #10

It's reasonable to assume with this coverage range that 5G would be ideal for home use. You might want to stick with it unless you need to connect many devices or access the internet from a distant location like a store. Everyone's situation is different, but converting to 5G seems like the best choice if you don't want to rely on that network.

Pages (2): 1 2 Next