F5F Stay Refreshed Software Operating Systems Tried updating the kernel on Manjaro but got stuck in a boot loop. Need advice on resolving this issue.

Tried updating the kernel on Manjaro but got stuck in a boot loop. Need advice on resolving this issue.

Tried updating the kernel on Manjaro but got stuck in a boot loop. Need advice on resolving this issue.

L
Lipokily
Member
Find
73
03-20-2023, 06:10 PM
#1
Hey, I see you're dealing with a boot loop issue after updating your system. Here are some steps you can try to fix it without needing a full clean install:

1. **Check Boot Order** – Make sure your boot drive (SSD) is set as the first option in the BIOS/UEFI settings.
2. **Disable Secure Boot** – If enabled, temporarily disable it to see if that resolves the loop.
3. **Reset BIOS Settings** – Try resetting the BIOS to default or a known-good configuration.
4. **Check for Hardware Issues** – Ensure both drives are properly connected and functioning.
5. **Update Bootloader** – Sometimes updating the bootloader (e.g., GRUB) helps.
6. **Test with Another Drive** – If possible, switch to the HDD to rule out a problem with the SSD.
7. **Sanitize Only if Necessary** – If you're comfortable, you can perform a clean install on the boot drive after troubleshooting.

Let me know what you find, and I’ll guide you further!
Reply
Reply
L
Lipokily
03-20-2023, 06:10 PM #1

Hey, I see you're dealing with a boot loop issue after updating your system. Here are some steps you can try to fix it without needing a full clean install:

1. **Check Boot Order** – Make sure your boot drive (SSD) is set as the first option in the BIOS/UEFI settings.
2. **Disable Secure Boot** – If enabled, temporarily disable it to see if that resolves the loop.
3. **Reset BIOS Settings** – Try resetting the BIOS to default or a known-good configuration.
4. **Check for Hardware Issues** – Ensure both drives are properly connected and functioning.
5. **Update Bootloader** – Sometimes updating the bootloader (e.g., GRUB) helps.
6. **Test with Another Drive** – If possible, switch to the HDD to rule out a problem with the SSD.
7. **Sanitize Only if Necessary** – If you're comfortable, you can perform a clean install on the boot drive after troubleshooting.

Let me know what you find, and I’ll guide you further!

Reply
Reply
Z
zLeoZiin
Senior Member
Find
503
03-25-2023, 09:33 PM
#2
Keep the shift active during startup to access the GRUB menu. You should be able to choose a different kernel.
Reply
Reply
Z
zLeoZiin
03-25-2023, 09:33 PM #2

Keep the shift active during startup to access the GRUB menu. You should be able to choose a different kernel.

Reply
Reply
B
Bap56
Member
Find
58
04-13-2023, 04:50 PM
#3
Avoid removing the HD and reinstall from an ISO on a USB drive onto the SSD. Without the HD it remains unaffected.
Reply
Reply
B
Bap56
04-13-2023, 04:50 PM #3

Avoid removing the HD and reinstall from an ISO on a USB drive onto the SSD. Without the HD it remains unaffected.

Reply
Reply
R
Rinse_SoC
Junior Member
Find
49
04-14-2023, 01:33 AM
#4
Manjaro relies on Arch Linux and maintains GRUB, which might connect to the mentioned article about GRUB bootloader updates.
Reply
Reply
R
Rinse_SoC
04-14-2023, 01:33 AM #4

Manjaro relies on Arch Linux and maintains GRUB, which might connect to the mentioned article about GRUB bootloader updates.

Reply
Reply
F
Fear_Berzerk
Member
Find
63
04-17-2023, 03:53 PM
#5
I would begin by using a Linux live setup to transfer your files from the non-functional drive to a backup storage. After that, the simplest approach could be to reinstall Linux, ensuring you choose the correct installation drive—preferably an SSD. Based on my experience, FreeBSD offers the highest stability and data protection. The setup process is somewhat more challenging, but once complete it becomes quite intuitive. You likely have the expertise for this kind of configuration. Upgrading FreeBSD to newer versions is straightforward, allowing continuous improvements without needing a full reinstall. Void Linux, while technically a rolling release, tends to be more reliable than Arch and Manjaro. I’m unsure if Void performs better in practice, but I haven’t encountered any issues personally. The XFCE version paired with glibc installs rapidly. Alongside Clear Linux, Void is among the fastest options for workstations. With XBPS packages available, plus Flatpak and Nix support, you gain access to roughly 100,000 packages at your disposal.
Reply
Reply
F
Fear_Berzerk
04-17-2023, 03:53 PM #5

I would begin by using a Linux live setup to transfer your files from the non-functional drive to a backup storage. After that, the simplest approach could be to reinstall Linux, ensuring you choose the correct installation drive—preferably an SSD. Based on my experience, FreeBSD offers the highest stability and data protection. The setup process is somewhat more challenging, but once complete it becomes quite intuitive. You likely have the expertise for this kind of configuration. Upgrading FreeBSD to newer versions is straightforward, allowing continuous improvements without needing a full reinstall. Void Linux, while technically a rolling release, tends to be more reliable than Arch and Manjaro. I’m unsure if Void performs better in practice, but I haven’t encountered any issues personally. The XFCE version paired with glibc installs rapidly. Alongside Clear Linux, Void is among the fastest options for workstations. With XBPS packages available, plus Flatpak and Nix support, you gain access to roughly 100,000 packages at your disposal.

Reply
Reply