Transfer Puppy Linux to HDD efficiently.
Transfer Puppy Linux to HDD efficiently.
Sure, clarify your point. If you're setting up a new system, you just need to load puppy Linux into RAM from a USB. Sometimes you need to save files to the local hard drive. While it's possible to fully install puppy Linux, it's not advised as explained later. By default, live CDs or RAM-based OSes don't have local drives mounted. To write files to the hard drive, you must first mount it. Be careful, since in puppy Linux you're root by default and mounted files become accessible to the OS.
1. Identify the drive and partition you wish to store data on. Run lsblk in a terminal (usually /dev/sda1 works).
2. Create a folder to mount the drive: mkdir ~/hdd.
3. Mount the drive: /dev/sda1 ~/hdd.
4. Switch to that directory: cd ~/hdd.
5. Now you can create files or directories using mkdir or touch.
While it's technically feasible to install puppy Linux directly to the hard drive (formatting and installing), I wouldn't suggest it due to limitations and because you're already root. Puppy Linux is better suited as a rescue environment or for experimenting without permanent changes. If you truly need a full install, consider another distro like Linux Mint, Ubuntu, or CentOS. This approach doesn't copy itself to RAM, which is a drawback. Let me know if you need further help.
It seems you often needed to load Puppy Linux from a specific type of storage device, which can be inconvenient. However, your puppy files—documents and photos—were automatically saved to the hard drive. That works for you.
Not automatically done when starting from a USB device. (Local drive isn't mounted at boot from USB) This is why you need to mount the drive as described in the previous post, so items can be stored on the hard drive. You can still have the drive automatically mounted at startup by changing the /etc/fstab file.