F5F Stay Refreshed Power Users Overclocking Top water cooling system for AMD Ryzen 5 1600X (also compatible with 2600X using the same socket)

Top water cooling system for AMD Ryzen 5 1600X (also compatible with 2600X using the same socket)

Top water cooling system for AMD Ryzen 5 1600X (also compatible with 2600X using the same socket)

L
Lexi48Heat
Member
223
12-05-2018, 07:32 AM
#1
Top Water Cooling Kit Available Nearby
I suggest this seller: https://ddstore.mk/
Alternatively, you can check other shops since I’m based in Skopje, Macedonia.
I’m also planning to water my GPU (GTX 1080Ti). How do I connect the tubing to the water tank and install a waterblock for both GPU and CPU? Thanks for your help—I’m new to hardware and PC building mainly through software.
L
Lexi48Heat
12-05-2018, 07:32 AM #1

Top Water Cooling Kit Available Nearby
I suggest this seller: https://ddstore.mk/
Alternatively, you can check other shops since I’m based in Skopje, Macedonia.
I’m also planning to water my GPU (GTX 1080Ti). How do I connect the tubing to the water tank and install a waterblock for both GPU and CPU? Thanks for your help—I’m new to hardware and PC building mainly through software.

M
Mozeus
Junior Member
14
12-05-2018, 10:53 AM
#2
I believe it's wise to review the watercooling sticker (found in my profile) before considering any of our recommendations for buying.
M
Mozeus
12-05-2018, 10:53 AM #2

I believe it's wise to review the watercooling sticker (found in my profile) before considering any of our recommendations for buying.

P
PandaNinja42
Junior Member
7
12-05-2018, 11:41 AM
#3
I recommend starting with hardware if you're new to it and avoid thinking about a “real” loop. Opt for an AIO such as Game Max Iceberg 120/240mm. The 120 model suits your 2600x well, it’s affordable (about 42GBP for the 120), and it performs reliably with quiet solid fans.

For beginners, let the CPU auto overclock or use XFR 2 settings. With a good cooler like an AIO, you can achieve temperatures between 4.2 and 4.15 while gaming on all cores. An AIO provides sufficient cooling for Ryzen quietly even at high overclocks because of its efficiency, solid design, and low power consumption.

If you decide to go further with locking down the settings, make sure to thoroughly test it using a suite rather than just trying it out. This helps prevent potential Windows corruption from a failed boot.

I’ve had several Ryzen chips: 1600 (sold at 3.9), 1700x (damaged at 3.925), and 2200G (a backup chip, only got 3.875). Now I have a solid first Ryzen.

I believe my luck came from the right silicon – a Biostar X370GTN motherboard and a 16GB Trident Z 3600 CL17 at 3200XMP with this cooler. It reached a stable 95 blend at 4.1GHz, which is close to the target of 4.2-4.15. If you’re lucky, you might hit 4.2-4.3, especially on the 2700x. These chips are better than the first-generation Ryzen but still offer a solid boost toward an efficient and powerful system that becomes more stable over time. However, don’t expect 4.5 unless you push it with bus clock and turbo auto.

Always stress test. If it crashes or freezes, don’t blame anything—reboot and try adjusting voltage or reducing load. The safe maximum is around 1.425V. Avoid the 1600x model; it’s decent but not sufficient. A 2600x costs the same as a used 1600 in the UK before prices surged.
P
PandaNinja42
12-05-2018, 11:41 AM #3

I recommend starting with hardware if you're new to it and avoid thinking about a “real” loop. Opt for an AIO such as Game Max Iceberg 120/240mm. The 120 model suits your 2600x well, it’s affordable (about 42GBP for the 120), and it performs reliably with quiet solid fans.

For beginners, let the CPU auto overclock or use XFR 2 settings. With a good cooler like an AIO, you can achieve temperatures between 4.2 and 4.15 while gaming on all cores. An AIO provides sufficient cooling for Ryzen quietly even at high overclocks because of its efficiency, solid design, and low power consumption.

If you decide to go further with locking down the settings, make sure to thoroughly test it using a suite rather than just trying it out. This helps prevent potential Windows corruption from a failed boot.

I’ve had several Ryzen chips: 1600 (sold at 3.9), 1700x (damaged at 3.925), and 2200G (a backup chip, only got 3.875). Now I have a solid first Ryzen.

I believe my luck came from the right silicon – a Biostar X370GTN motherboard and a 16GB Trident Z 3600 CL17 at 3200XMP with this cooler. It reached a stable 95 blend at 4.1GHz, which is close to the target of 4.2-4.15. If you’re lucky, you might hit 4.2-4.3, especially on the 2700x. These chips are better than the first-generation Ryzen but still offer a solid boost toward an efficient and powerful system that becomes more stable over time. However, don’t expect 4.5 unless you push it with bus clock and turbo auto.

Always stress test. If it crashes or freezes, don’t blame anything—reboot and try adjusting voltage or reducing load. The safe maximum is around 1.425V. Avoid the 1600x model; it’s decent but not sufficient. A 2600x costs the same as a used 1600 in the UK before prices surged.