Tips for using RAM when overclocking a CPU (4770k)
Tips for using RAM when overclocking a CPU (4770k)
I'm about to attempt my first overclock in a few days, right after my Arctic Silver arrives. I plan to clean my CPU of the stock thermal paste from my H105, take apart my PC, remove all dust, and reassemble everything with a focus on optimal airflow and shine.
On the other hand, I've always been hesitant about overclocking but am eager to finally give it a try—it means learning everything.
From what I understand, I need to gradually adjust the multiplier and voltage until I reach a stable performance. I usually switch between override mode for voltage and adaptive settings afterward.
The only puzzle is why RAM speeds are often adjusted during OC. Based on my basic knowledge, I thought RAM speed depends on the CPU's base clock, but since only the multiplier changes, the base clock remains unchanged.
Additionally, I've seen some YouTube tutorials where people tweak RAM speeds while doing CPU overclocking, while others don't touch RAM at all. This adds another layer of confusion.
Could someone please clarify in detail how CPU and RAM interact during an OC process? Are there specific RAM considerations I should pay attention to when attempting my CPU overclock? Thanks!
Just configure your DRAM (if it's 1600 or higher, it's straightforward—enable XMP and pick profile 1). You can adjust the CPU OC as long as you're using the multiplier method; otherwise, experimenting with BCLK could cause issues.
Tradesman1 :
You don't just set your DRAM, if it's 1600 or better it's as simple as enabling XMP and choosing profile 1. You can adjust the CPU OC as long as you're using the multiplier method, ensuring they don't conflict.
😉
Thank you, sir. I'm still getting the hang of this tech world, but it's making me feel better. Glad I understood the basics about RAM and CPU.