Threadripper 2920x discussion thread Overclocking guide and tips

C

CannonDDOS
Junior Member

2

09-14-2018, 07:09 PM

#1

Hello, welcome! I see you're getting familiar with BIOS and want to fine-tune your system. For your current setup, you're running the CPU at stock speeds and using default fan settings. Your fans tend to be quite noisy, especially when the CPU hits around 4.2 GHz. You're aiming for a more stable performance around 4.01 GHz instead.

Here are some suggestions:

- Check the BIOS menu for fan control options—look for "Fan Control" or "Temperature Management."
- Adjust the fan curves to prioritize stability over maximum speed. Many users prefer a balanced curve that keeps fans running smoothly.
- Consider setting a lower base speed (e.g., 3,000–4,000 RPM) and fine-tune it based on your noise tolerance.
- If you're comfortable, enable "CPU Cooling" or "Thermal Throttling" to help maintain consistent performance.
- Ensure your CPU cooler is properly seated and the radiator is clean for optimal airflow.

Let me know if you need step-by-step guidance for your specific BIOS version!

A

Artur630
Member

168

09-14-2018, 11:47 PM

#2

Ryzen overclocking isn't ideal; experts suggest using Ryzen Master and turning on Precision Boost Overdrive. For quieter performance, adjust the fan settings to a gentler profile—your AIO should handle the CPU well even at lower speeds.

T

Trayleio
Member

63

09-15-2018, 09:39 AM

#3

Thanks for the guidance. I'll test the Ryzen Master setting. For the fans, I'll opt for a milder curve to see if it improves performance. Under my present configuration, temperatures stay under 65°C during workload.