Thoughts about cpu coolers for the 8600k with some overclocking (new builder)
Thoughts about cpu coolers for the 8600k with some overclocking (new builder)
I have a few questions:
1) Is it accurate that overclocking shortens the lifespan of your CPU, but by then it might already be outdated?
2) I intend to overclock to at least 4.8GHz. Will the new Dark Rock 4 meet this requirement? Or would opting for the Dark Rock Pro 4 be a more secure choice?
3) Should I keep the system at its original settings until I need the performance boost, or should I start overclocking immediately?
Thanks!
Hi Foreverunsure,
1°/ Overclocking is pushing the chip beyond its factory caracteristics so during this, you rise the tension, the current (that cause electromigration that very very very very slowly degrade the CPU) and the heat.
So yes, overclocking reduce the lifespan of the processor, but don't worry, with an overclock well done, your chip will be obsolete before it breaks.
Do you prefer to have a beast for 5 years (and more) or a standard chip for 2 years and a slow one for 18 years and more?
(This is a bit Exaggerated)
2°/ Normally, at least if you don't loose the silicone lottery, you will be able to reach 4.8GHz. BUT, as the heat is the second chip killer (after the current) the cooler the better. If i were you, and if the...
Hi Foreverunsure,
1°/ Overclocking is pushing the chip beyond its factory caracteristics so during this, you rise the tension, the current (that cause electromigration that very very very very slowly degrade the CPU) and the heat.
So yes, overclocking reduce the lifespan of the processor, but don't worry, with an overclock well done, your chip will be obsolete before it breaks.
Do you prefer to have a beast for 5 years (and more) or a standard chip for 2 years and a slow one for 18 years and more?
(This is a bit Exaggerated)
2°/ Normally, at least if you don't loose the silicone lottery, you will be able to reach 4.8GHz. BUT, as the heat is the second chip killer (after the current) the cooler the better. If i were you, and if the budget says "OK", i'll go with the beefier I could so with the DRP4.
3°/ Overclocking is, for enthousiast like some of us in the forum, like a game, tweaking the system, to run it better than at stock (faster, cooler,...)
BUT you have to be aware that there are some risks if you don't go step by step. Don't rush and enjoy this "Game" of trial and error.
There are plenty of guides here and there!!
My tips are, don't go over 80-85°C in stress test and try to stay below 1.38V for daily usage.
FYI, I have the same CPU with a DRP3 and it runs pretty cool even at 5.2GHz (Max 80°C at 1.36V)
Rodolphe.