F5F Stay Refreshed Hardware Desktop This was my initial PC setup and kept crashing with BSODs.

This was my initial PC setup and kept crashing with BSODs.

This was my initial PC setup and kept crashing with BSODs.

W
Wilson1
Member
Find
178
01-24-2016, 12:09 PM
#1
Reply
Reply
W
Wilson1
01-24-2016, 12:09 PM #1

Reply
Reply
M
mayan12345
Member
Find
207
01-27-2016, 07:49 PM
#2
Experiencing RAM-related blue screen errors? Open BIOS, disable XMP/DOCP settings, and configure RAM to 5600MT/s. Check if the problem resolves.
Reply
Reply
M
mayan12345
01-27-2016, 07:49 PM #2

Experiencing RAM-related blue screen errors? Open BIOS, disable XMP/DOCP settings, and configure RAM to 5600MT/s. Check if the problem resolves.

Reply
Reply
_
_STroKX_
Junior Member
Find
4
02-06-2016, 05:58 PM
#3
Check the cause of the problems with XMP settings. If needed, consider swapping out the RAM modules.
Reply
Reply
_
_STroKX_
02-06-2016, 05:58 PM #3

Check the cause of the problems with XMP settings. If needed, consider swapping out the RAM modules.

Reply
Reply
Z
zLeoZiin
Senior Member
Find
503
02-06-2016, 11:40 PM
#4
The ram speed is definitely right. 6400 seems way too high for the CPU. AMD only promises up to 5200 for this chip. Beyond that you're in luck. You don't have to swap the RAM, just adjust the speed. It might work just fine at 6000.
Reply
Reply
Z
zLeoZiin
02-06-2016, 11:40 PM #4

The ram speed is definitely right. 6400 seems way too high for the CPU. AMD only promises up to 5200 for this chip. Beyond that you're in luck. You don't have to swap the RAM, just adjust the speed. It might work just fine at 6000.

Reply
Reply
C
CAMOOO
Member
Find
225
02-07-2016, 04:51 AM
#5
Disabling XMP didn't fix the issue. The BIOS indicates RAM is operating at 4800 MHz, but it's still crashing.
Reply
Reply
C
CAMOOO
02-07-2016, 04:51 AM #5

Disabling XMP didn't fix the issue. The BIOS indicates RAM is operating at 4800 MHz, but it's still crashing.

Reply
Reply
J
JustRhune
Member
Find
199
02-07-2016, 12:28 PM
#6
Disabling XMP didn't fix the issue. The BIOS indicates RAM is operating at 4800 MHz, but it's still crashing.
Reply
Reply
J
JustRhune
02-07-2016, 12:28 PM #6

Disabling XMP didn't fix the issue. The BIOS indicates RAM is operating at 4800 MHz, but it's still crashing.

Reply
Reply
K
Killerman1834
Posting Freak
Find
885
02-08-2016, 03:05 PM
#7
Remove the second RAM module, keeping only the one in slot A2. Check if the system still crashes. If it does, take out the first module and insert the one you removed. This helps confirm if the problem is hardware-related.
Reply
Reply
K
Killerman1834
02-08-2016, 03:05 PM #7

Remove the second RAM module, keeping only the one in slot A2. Check if the system still crashes. If it does, take out the first module and insert the one you removed. This helps confirm if the problem is hardware-related.

Reply
Reply