F5F Stay Refreshed Hardware Desktop This system is running without issues.

This system is running without issues.

This system is running without issues.

V
VibrationArrow
Member
96
03-14-2022, 01:55 AM
#1
I purchased the new system yesterday and put all the parts together. When trying to upload, it keeps generating beep codes—one long and three short—which suggests a memory or storage issue. I've tried reseating RAM, swapping modules, and using a single RAM stick, but nothing works. The upload still fails. Could there be a problem with the CPU or RAM? -Ryzen 5 4600g | Asus Prime a520m-k | Corsair Vengeance LX 8GB DDR4 (two sticks) | WD SN350 480GB SSD | Antec Atom B650 power | Antec NX410 v2 case
V
VibrationArrow
03-14-2022, 01:55 AM #1

I purchased the new system yesterday and put all the parts together. When trying to upload, it keeps generating beep codes—one long and three short—which suggests a memory or storage issue. I've tried reseating RAM, swapping modules, and using a single RAM stick, but nothing works. The upload still fails. Could there be a problem with the CPU or RAM? -Ryzen 5 4600g | Asus Prime a520m-k | Corsair Vengeance LX 8GB DDR4 (two sticks) | WD SN350 480GB SSD | Antec Atom B650 power | Antec NX410 v2 case

V
VibrationArrow
Member
96
03-17-2022, 07:11 AM
#2
GPU problem detected.
Online solution: enable monitor before starting PC.
Three quick beeps indicate the issue.
V
VibrationArrow
03-17-2022, 07:11 AM #2

GPU problem detected.
Online solution: enable monitor before starting PC.
Three quick beeps indicate the issue.

S
Spaceface16518
Senior Member
564
03-18-2022, 07:06 PM
#3
Check if the BIOS version is listed and confirm whether the label is on the packaging.
S
Spaceface16518
03-18-2022, 07:06 PM #3

Check if the BIOS version is listed and confirm whether the label is on the packaging.