F5F Stay Refreshed Hardware Desktop This setup pushes extremely high voltages onto a 9600kHz motherboard.

This setup pushes extremely high voltages onto a 9600kHz motherboard.

This setup pushes extremely high voltages onto a 9600kHz motherboard.

Pages (2): Previous 1 2
R
Rakedge
Member
227
04-03-2022, 08:06 AM
#11
I checked, but no sync for all cores available. It seems the motherboard handles it in another mode—this is supported by the screenshot.
R
Rakedge
04-03-2022, 08:06 AM #11

I checked, but no sync for all cores available. It seems the motherboard handles it in another mode—this is supported by the screenshot.

M
MrCringles
Member
154
04-03-2022, 09:35 AM
#12
Yes, that's correct.
M
MrCringles
04-03-2022, 09:35 AM #12

Yes, that's correct.

U
Unyke
Member
146
04-03-2022, 10:47 AM
#13
The mean reading at full capacity is 1.42v, with idle voltage fluctuating from 1.32 to 1.4.
U
Unyke
04-03-2022, 10:47 AM #13

The mean reading at full capacity is 1.42v, with idle voltage fluctuating from 1.32 to 1.4.

T
Togimaru
Junior Member
1
04-03-2022, 12:05 PM
#14
It's all good then, so I think you don't have to make any changes in the bios.
T
Togimaru
04-03-2022, 12:05 PM #14

It's all good then, so I think you don't have to make any changes in the bios.

M
MatthewRyan67
Junior Member
46
04-05-2022, 03:43 AM
#15
I wasn’t too concerned since some folks warned it could damage my CPU. But I plan to adjust settings in the BIOS to achieve a steady 5GHz performance.
M
MatthewRyan67
04-05-2022, 03:43 AM #15

I wasn’t too concerned since some folks warned it could damage my CPU. But I plan to adjust settings in the BIOS to achieve a steady 5GHz performance.

M
makan203
Junior Member
46
04-05-2022, 08:07 PM
#16
The temperature under full core stress would be high. Did you verify the thermal performance?
M
makan203
04-05-2022, 08:07 PM #16

The temperature under full core stress would be high. Did you verify the thermal performance?

P
PRT
Junior Member
14
04-07-2022, 01:54 PM
#17
That's why I mentioned it's okay as long as it stays near 70 degrees.
P
PRT
04-07-2022, 01:54 PM #17

That's why I mentioned it's okay as long as it stays near 70 degrees.

J
JonZthan
Member
60
04-07-2022, 09:34 PM
#18
You're working with offset voltages that remain steady, yet you want to increase the temperatures significantly.
J
JonZthan
04-07-2022, 09:34 PM #18

You're working with offset voltages that remain steady, yet you want to increase the temperatures significantly.

S
SkeptiCat
Member
75
04-17-2022, 11:47 PM
#19
You're observing that the fourth core operates at a higher temperature compared to the rest. To address this, you may need to adjust cooling systems or monitor thermal performance closely.
S
SkeptiCat
04-17-2022, 11:47 PM #19

You're observing that the fourth core operates at a higher temperature compared to the rest. To address this, you may need to adjust cooling systems or monitor thermal performance closely.

Pages (2): Previous 1 2