This model has no additional information available.
This model has no additional information available.
chloe_gamer
03-31-2020, 11:41 AM #1You've received a new B550 Tomahawk with Ryzen 5600X but face issues with posting. The box indicates 3rd Gen Ryzen Desktop Ready, yet debug lights remain stuck on VGA. You've tested multiple cards without success and attempted a BIOS flash while the CPU was installed, but no updates appear to be working. There are no audible beep sounds, only the debug lights, sometimes showing CPU & VGA, other times nothing at all. You're concerned about missing the RMA step after the first boot, which caused power issues and halted the loop. It seems there might have been a BIOS error or misconfiguration. Consider checking the BIOS version, ensuring it matches your motherboard's requirements, and verifying power delivery stability. If problems persist, consult the manufacturer's support for further guidance.
I might consider using a flash drive to update the BIOS and install the new BIOS that supports Zen 3 chips. Perhaps you should upgrade the BIOS to accommodate the 3000 Ryzen processor. If possible, try installing a 3000 Ryzen and then attempt the BIOS update.
It seems you're facing challenges switching from Intel to AMD, especially with your first AMD board and CPU from the early 2000s. You're wondering if removing the CPU is necessary for running the Q-Flash or M-Flash. The instructions provided don't give clear details, so you might need to consult the specific MSI documentation for your setup.
LeBlueShadow_
04-05-2020, 02:22 PM #4Attempted once more using the newest BIOS for the Tomahawk; the red light near the USB port blinks briefly when connected, then stays on permanently even after connecting the device—no update appears.
conclase2000
04-05-2020, 08:57 PM #5Consider using another USB or external drive. It could be a SoL issue if you can't install a Zen 2 chip inside. This scenario arises from early adoption paired with limited availability.
wiiNinjaOne
04-18-2020, 05:23 PM #6It seems the issue isn't resolved with another USB port. You might want to start the return process.
Probably a mix of luck and mistakes, but the BIOS update worked and everything is running smoothly! Appreciate the video link.
FanEnsemble
04-20-2020, 05:53 PM #7It's a fresh start this year! Sharing updates from my new setup. Probably a mix of luck and mistakes, but the BIOS update worked and everything is running smoothly! Appreciate the video link.