This 64GB RAM module is designed for compatibility with your system.
This 64GB RAM module is designed for compatibility with your system.
I'm checking a 4x16GB module (F4-3600C16Q-64GTZR) for the Gigabyte Z690 Aero G DDR4 board. It doesn't appear in the QVL based on the listed speed and capacity. With these specs, it should support XMP2.0 speeds if you're using the right settings.
4x16 setup is really bad, try 2x32 instead just to avoid crashes. These big boards often had DDR4 problems, but it looks like they’ve mostly been fixed. Quality is questionable, most RAM sticks should work, though some boards refuse to boot with certain dies—probably rare, so you can usually find any RAM you need.
Based on what I've understood, 4x16GB typically causes more strain on the IMC and introduces extra delays for certain operations.
Are you referring to boards specifically built around the Z690 motherboard with DDR4 memory?
It appears the product is confirmed. Gigabyte likely hasn't refreshed their 4x kit versions. Your specific model is already listed in their QVL. See the attached image for details.
It's unclear how you overlooked it. Knowing this is helpful.
Yes, overclocking is possible. You can increase clock speeds by fine-tuning timings from 3600 to 3600MHz or higher, depending on your hardware. Just be aware that using high-end RAM can raise costs, while cheaper options like Ballistix offer better performance at a lower price. For serious gains, 4000MHz is achievable with 16GB memory, though it may strain the system and require more voltage to maintain stability.