F5F Stay Refreshed Hardware Desktop The Zotac 3070 ceased displaying 2560x1080 resolution on your ultrawide screen unexpectedly.

The Zotac 3070 ceased displaying 2560x1080 resolution on your ultrawide screen unexpectedly.

The Zotac 3070 ceased displaying 2560x1080 resolution on your ultrawide screen unexpectedly.

N
npalmen
Member
Find
202
09-03-2020, 04:33 PM
#1
The main point is clear... my setup has been stable for years, but now it’s not displaying full resolution. I’ve tested various fixes—switching OS, checking settings, updating drivers, changing cables—and none resolved the issue. The problem seems tied to the GPU itself. I also noticed sensitivity issues with the display port cable, which might affect performance. I have another monitor working fine at a different aspect ratio. Could you offer any advice?
Reply
Reply
N
npalmen
09-03-2020, 04:33 PM #1

The main point is clear... my setup has been stable for years, but now it’s not displaying full resolution. I’ve tested various fixes—switching OS, checking settings, updating drivers, changing cables—and none resolved the issue. The problem seems tied to the GPU itself. I also noticed sensitivity issues with the display port cable, which might affect performance. I have another monitor working fine at a different aspect ratio. Could you offer any advice?

Reply
Reply
T
TheNiceGirl
Junior Member
Find
19
09-05-2020, 05:54 AM
#2
Have you adjusted the display settings to 2560x1080 in the Nvidia Control Panel? If so, the issue might be related to EDID information being sent from the screen to your computer.
Reply
Reply
T
TheNiceGirl
09-05-2020, 05:54 AM #2

Have you adjusted the display settings to 2560x1080 in the Nvidia Control Panel? If so, the issue might be related to EDID information being sent from the screen to your computer.

Reply
Reply
A
awestt
Member
Find
83
09-07-2020, 10:49 AM
#3
Hello, the problem makes the monitor shut down and display no signal, but it only happens after restarting the device. As mentioned earlier, this isn't related to the monitor or cable since the issue disappears when using the same setup with a laptop.
Reply
Reply
A
awestt
09-07-2020, 10:49 AM #3

Hello, the problem makes the monitor shut down and display no signal, but it only happens after restarting the device. As mentioned earlier, this isn't related to the monitor or cable since the issue disappears when using the same setup with a laptop.

Reply
Reply
A
assassan488
Junior Member
Find
28
09-13-2020, 09:07 AM
#4
Ignore that instruction.
Reply
Reply
A
assassan488
09-13-2020, 09:07 AM #4

Ignore that instruction.

Reply
Reply
M
Mamalodong
Junior Member
Find
10
09-13-2020, 12:38 PM
#5
Consider updating the firmware or BIOS on the GPU. This isn't something I've done before, but it seems the device might need a refresh to get back to normal operation.
Reply
Reply
M
Mamalodong
09-13-2020, 12:38 PM #5

Consider updating the firmware or BIOS on the GPU. This isn't something I've done before, but it seems the device might need a refresh to get back to normal operation.

Reply
Reply
S
superschut
Member
Find
79
09-13-2020, 02:24 PM
#6
I’m not aware of any reliable sources focused on safe, general GPU tuning. Most online content aimed at VBIO overclocking often carries warnings about damaging hardware, so it’s best to stick to trusted guides or manufacturer recommendations.
Reply
Reply
S
superschut
09-13-2020, 02:24 PM #6

I’m not aware of any reliable sources focused on safe, general GPU tuning. Most online content aimed at VBIO overclocking often carries warnings about damaging hardware, so it’s best to stick to trusted guides or manufacturer recommendations.

Reply
Reply