The XMP profile isn't allowing me to start my computer.

F5F Stay Refreshed Hardware Desktop The XMP profile isn't allowing me to start my computer.

sharkie580
Junior Member

10-15-2023, 04:33 AM

I’ve already changed my CMOS battery several times trying to boost RAM speed in BIOS, but it still won’t start. I have a 64GB GSKILL Trident Z5 with a 6400MT/s processor and only the default 3600Hz can run. More details: motherboard N7 B650E, CPU 7800X3D, GPU 1080Ti.

sharkie580

10-15-2023, 04:33 AM #1

mineseuss
Member

10-22-2023, 01:51 PM

Checking the RAM slots and BIOS version. The 6400MT/s speed is currently available without a manual, but it won’t match 6000MT/s or 7600MT/s unless you adjust the tuning.

mineseuss

10-22-2023, 01:51 PM #2

Checking the RAM slots and BIOS version. The 6400MT/s speed is currently available without a manual, but it won’t match 6000MT/s or 7600MT/s unless you adjust the tuning.

Sertero28
Senior Member

589

10-28-2023, 08:50 AM

You’re utilizing all four 16GB slots. To find your BIOS version, you can check the manufacturer’s website or use a BIOS detection tool.

Sertero28

10-28-2023, 08:50 AM #3

You’re utilizing all four 16GB slots. To find your BIOS version, you can check the manufacturer’s website or use a BIOS detection tool.

ScrappyJesus
Member

11-04-2023, 10:39 PM

If you're able to provide this and receive 2x32GB instead, that would be ideal. Four slots can function, though the device is quite sensitive and you shouldn't just turn on XMP to assume it will work. You can look up the BIOS revision via an 'About' page in the BIOS (without a NZXT board) or use CPU-Z to check the mainboard section. There are many other methods available, but these are the two primary approaches I rely on.

ScrappyJesus

11-04-2023, 10:39 PM #4

kikofarto3
Member

133

11-05-2023, 05:31 PM

The bios update info for the CPU-Z main board section isn't visible in the image you shared. You may need to check the documentation or website directly for details.

kikofarto3

11-05-2023, 05:31 PM #5

The bios update info for the CPU-Z main board section isn't visible in the image you shared. You may need to check the documentation or website directly for details.

WelfareBaby
Member

148

11-23-2023, 07:23 PM

WelfareBaby

11-23-2023, 07:23 PM #6

rikkie99
Junior Member

11-23-2023, 08:03 PM

This week's fifth or sixth scenario involving four sticks is what we're discussing.

rikkie99

11-23-2023, 08:03 PM #7

This week's fifth or sixth scenario involving four sticks is what we're discussing.