The Wi-Fi connection is weak or unstable in your room.
The Wi-Fi connection is weak or unstable in your room.
The issue might stem from physical barriers like walls or dense structures made of metal.
Usually, an extender must also transmit the signal, which leads to marginally reduced speeds and longer ping times. Most range extenders from Linksys have performed well so far. I own the RE4000W (featuring two Ethernet ports at the base) and have also used the RE3000W (with one Ethernet port). You can find a refurbished RE4000W on Amazon for $19 here: https://www.amazon.com/Linksys-RE4000W-W...00U1M8LIU/. The optimal choice would be to install an access point close to your room or within it.
There are no bricks, only regular walls. My room is located in a corner of the house.
Your router could support several Ethernet connections. You might connect a Cat 5 or similar cable to the ceiling or beneath the floor for additional wired access.
It does, but the attic already has insulation so it won’t work. We also have tile, which makes it unsuitable. When I used the powerline adapter, it was very slow. Would connecting it directly help? Also, running it outside and back in could cause signal loss over 80 feet—do you think that would affect performance?
To set up an access point, you'll need the necessary hardware and software. Typically, this includes a wireless router or access point device, configuration tools, and possibly a network management system. You'll also require documentation or guides specific to your setup.
A direct Ethernet link will perform better, yes. It's hard to judge strength over long distances, but I'm not confident 80 feet is sufficient. You might want a faster Cat 5 for extended runs if needed. When running outside, wrap it in PVC pipe or similar to shield it. Ideally, go through walls and floors, then back into the room for a cleaner setup. Updated March 19, 2022 by An0maly_76