The update isn't working because of a problem with your system or the installation process.
The update isn't working because of a problem with your system or the installation process.
I’m still figuring out the right way to approach this issue. Over the past month I’ve been having trouble using my PC after a recent BIOS update. I bought new parts for my system as a birthday gift, hoping it would be my first major upgrade in years. My setup includes a new motherboard and processor. The main problem is that I can’t boot or use Windows after the update.
Here’s what happened: I purchased an Intel 14700K, paired it with an MSI Pro Z690-A DDR4 RAM (without a Wi-Fi chip since I’m budget-conscious), and used a motherboard that had bent pins and a damaged CPU socket. After some fixes, I managed to get it working temporarily. But the processor kept overheating, which is typical for new Intel CPUs.
I decided to update my BIOS, which resolved the issue—my computer now boots normally. However, I’m still facing infinite blue screens and can’t access the recovery tools. I suspect the motherboard might be damaged, so I replaced it. After installing the new board, everything updated properly, but the problem persists.
I tried reinstalling Windows, but the USB installer failed to load. The SSD booted without the drive, and even after reseating RAM, the issue continued. I’m exhausted and considering a full system reset or a fresh install. I’ll need help figuring out drivers and possibly checking for outdated software before making any decisions. This is really frustrating.
Are you certain you have the latest BIOS installed? With so many board designs, it’s simple to choose incorrectly... In your situation, I recommend stopping the adjustments and using the functional BIOS. Consider completing an online quick course about Intel CPU power, voltages, and clocks, then configure BIOS settings for optimal performance without excessive heat—it’s actually straightforward.
I’m sure I applied the right bios settings. Also, after receiving the new motherboard, it came with an updated BIOS, but it wouldn’t boot until I flashed back to the older version from MSI’s site that I had previously downloaded. I didn’t update that earlier version—it was included with the new board. Updated on January 19, 2025 by freikugel4 clarification
You're likely right to consider a quick BIOS setup before installing Windows. MSI motherboards can vary quite a bit, and a mismatched BIOS might cause issues without completely destroying the board.
Are you certain your CPU is functioning properly? It seems to be operating only with the older BIOS, which causes over-voltage on the chip and leads to degradation.
You recently received the CPU and need to install a BIOS update, but you're unable to boot into Windows.
Create a Windows installation media, start from there, and it will present the reformat choice
It would help to approach it calmly tomorrow. Unfortunately, I’m not comfortable navigating MSI’s BIOS, so I can’t point you to the right menu option.