the toolless rj45 connector delivers identical performance compared to standard rj45
the toolless rj45 connector delivers identical performance compared to standard rj45
I purchased 25m Cat6A cable for Wi-Fi connectivity across the house. It's solid-core Cat6A U/FTP type, thicker than typical router cables I usually use. For attaching RJ45 connectors at both ends, I'm unsure which ones to choose. I've noticed some tools-free options that don't need any clamps. Will they match the performance of standard RJ45 connectors that require a tool, or should I consider getting a crimp tool and using the Cat6A cable as shown below?
In theory, they provide identical results. They're acceptable as long as you use the correct cable—ideally solid core wire cable. For RJ45 connectors meant for crimping, pair the connector with the appropriate cable type: there are universal pins that work with both stranded and solid core wires, and there are also pin sets designed exclusively for stranded wires.
The focus is on arranging wires correctly and minimizing twists. Using connectors with crimp techniques helps maintain twists throughout the connector body, allowing pairs to stay twisted until inside. These crimped connectors create a slightly larger gap, providing extra untwisted space (measured from the wire bite all the way to contacts). In real life, both crimped and pass-through RJ45 connectors work well for speeds over 10gbps, staying well within safe limits. When using RJ45 connectors with pass-through design, ensure the ends don’t touch the receiver or shielding to avoid shorts. Crimped connectors have a drawback: improper tools can warp plastic parts, causing them to loosen after repeated temperature changes. A few years ago, I encountered cheap crimped cables in a hot, humid server room; after months of use, the pins began pulling out due to heat cycles and weakened plastic. Even then, I thought it made sense to purchase longer cables from the store for better reliability.