F5F Stay Refreshed Hardware Desktop The system shuts down repeatedly.

The system shuts down repeatedly.

The system shuts down repeatedly.

J
JamTheJoker
Member
102
09-23-2016, 11:15 PM
#1
Hi, I'm not sure if you're asking the right thing, but I've experienced similar problems before. I upgraded my memory to 32GB across two models—HyperX Fury and HyperX Beast—all using DDR4 at 3200mhz. When I power off completely (PSU off), the system restarts several times before booting normally. Sometimes it goes into Safe Mode, but the settings don't reset back to defaults. After exiting, it works fine. Could this be a concern? It sounds unusual, but I want to make sure it's not damaging anything inside. Thanks for your help!
J
JamTheJoker
09-23-2016, 11:15 PM #1

Hi, I'm not sure if you're asking the right thing, but I've experienced similar problems before. I upgraded my memory to 32GB across two models—HyperX Fury and HyperX Beast—all using DDR4 at 3200mhz. When I power off completely (PSU off), the system restarts several times before booting normally. Sometimes it goes into Safe Mode, but the settings don't reset back to defaults. After exiting, it works fine. Could this be a concern? It sounds unusual, but I want to make sure it's not damaging anything inside. Thanks for your help!

X
Xephtor
Member
192
09-24-2016, 06:07 AM
#2
It's likely the problem stems from combining various RAM models, even if they belong to the same manufacturer. Mixing different RAM kits can sometimes result in compatibility problems, leading to system instability or odd behaviors such as repeated restarts before startup. Although it might not immediately damage your hardware, it’s unusual and could create future complications. To resolve this, consider these actions:

- Update your BIOS to the most recent release, since outdated versions may interfere with RAM functionality.
- Verify your motherboard's QVL (Qualified Vendor List) to confirm the RAM modules you're using are officially approved.
- Make sure each RAM module is correctly placed in its designated slot.
- Test individual RAM units to identify any defective ones.
- Whenever feasible, use a set of RAM modules that match your system requirements for optimal performance and stability.

If the issue continues, replacing the mismatched RAM modules with compatible ones is recommended to restore normal operation.
X
Xephtor
09-24-2016, 06:07 AM #2

It's likely the problem stems from combining various RAM models, even if they belong to the same manufacturer. Mixing different RAM kits can sometimes result in compatibility problems, leading to system instability or odd behaviors such as repeated restarts before startup. Although it might not immediately damage your hardware, it’s unusual and could create future complications. To resolve this, consider these actions:

- Update your BIOS to the most recent release, since outdated versions may interfere with RAM functionality.
- Verify your motherboard's QVL (Qualified Vendor List) to confirm the RAM modules you're using are officially approved.
- Make sure each RAM module is correctly placed in its designated slot.
- Test individual RAM units to identify any defective ones.
- Whenever feasible, use a set of RAM modules that match your system requirements for optimal performance and stability.

If the issue continues, replacing the mismatched RAM modules with compatible ones is recommended to restore normal operation.