The system indicates a boot failure when XMP is active, yet it successfully starts without XMP enabled.
The system indicates a boot failure when XMP is active, yet it successfully starts without XMP enabled.
I’m working with the following components: ASROCK Z390 Taichi, G.Skill 32GB 3600mhz trident neo z, RTX 2070 Super Gigabyte OC 3 Fanned, NZXT KRAKEN X53, 750W PSU SEASONIC 80+ gold. I have enabled XMP and it reports system failure to boot multiple times with the prompt "press continue," yet when I press continue it doesn’t maintain XMP activation.
Hey there,
You can try set the memory manually. You do this in the bios also. Take the timings/voltage details from the 'SPD' and memory tabs in CPU-z. Manually enter those details into the mem tab in your bios. Re-start and see if the speed takes.
Sometimes XMP doesn't work, and manually setting it is the other option. If that doesn't work, I'd RMA the ram.
Hey there,
You can adjust the memory settings directly through the BIOS. Retrieve the timing/voltage information from the 'SPD' and memory tabs in CPU-z, then input those values into the mem tab in your BIOS. Restart and check if performance improves. Sometimes XMP fails, so manual adjustment is a viable alternative. If that doesn't work, consider returning the RAM for replacement.