The system fails to start following the BIOS upgrade.
The system fails to start following the BIOS upgrade.
did you try 1 stick in each different slot? Maybe you have a slot thats dead? So start with 1 stick in A1, then move that 1 stick to A2, and so on... this will at least tell you if you have any issues with the RAM slots... (i think this will work lol)
I attempted it, but only one stick of RAM functions in A1 and A2. It doesn’t work with B1 and B2. I have 8 GB, but Windows won’t boot.
Unclear what you mean. Could be a dead Mobo or your memory channel is malfunctioning in the CPU. Someone more knowledgeable will need to handle it. I don’t have anything else to offer.
Hello! Begin anew. Disconnect all drives except the DVD reader. Use the system disk and boot from it. Choose BIOS recovery, flash the chipset drivers, then install the required revision. The system will restart automatically. If nothing occurs, power down. Swap the processors, turn off the PSU, remove the battery for 10 minutes, clear the CMOS pins for 10 seconds, and then reassemble. Unless the board supports flashing back, this is the only method unless you purchase a programmer. Good luck!