The screw cannot be taken out from the case standoff.
The screw cannot be taken out from the case standoff.
Something in my pc has been bugging me since I built it. I changed my motherboard recently as one of the sockets on the old one broke. When I installed the new one though, I didnt fully tighten the case standoffs. One of the case standoffs now spins when I spin the screw. I cant screw it in more or remove it. I just left it at first, but I would like to be able to retighten the standoff, but I cant do that as I cant remove the screw. Does anyone know how I can do that? If I screw more, or loosen it a medium volume ping just happens as the case standoff rubs on the board a little.
Remove the motherboard from the case, then use pliers to grab the standoff and unscrew.
Take off every other screw on the motherboard, then take the board out. If the standoff gets stuck, turn the screw to loosen it.
I discovered a method to handle it. I noticed the standoff emerging from the back of my case. Using pliers, I secured the standoffs with it. From the front of the PC, I removed the screw while holding the standoff. I chose not to reinsert a screw if possible; it’s already positioned at the bottom, so it should be okay.