F5F Stay Refreshed Hardware Desktop The SATA connections won't accept the device fully.

The SATA connections won't accept the device fully.

The SATA connections won't accept the device fully.

Pages (2): Previous 1 2
H
HellWasHere
Member
104
11-17-2022, 10:57 AM
#11
I've owned this mobile device for a year now, so that might sound a bit strange. I'd prefer to go with a riser cable and bracket instead sooner rather than later.
H
HellWasHere
11-17-2022, 10:57 AM #11

I've owned this mobile device for a year now, so that might sound a bit strange. I'd prefer to go with a riser cable and bracket instead sooner rather than later.

M
Mod_masta
Member
191
11-17-2022, 10:57 AM
#12
There's also the possibility of no bracket space between MB & Case. That one user said he pushed the front (output) side in first, then click in the rear to resolve it. See if that works for you.
M
Mod_masta
11-17-2022, 10:57 AM #12

There's also the possibility of no bracket space between MB & Case. That one user said he pushed the front (output) side in first, then click in the rear to resolve it. See if that works for you.

F
FTGC_07
Junior Member
46
11-17-2022, 10:57 AM
#13
It's really tough, but I'd remove the board and try to place it outside a case, then you can see how much space is needed for the SATA ports.
F
FTGC_07
11-17-2022, 10:57 AM #13

It's really tough, but I'd remove the board and try to place it outside a case, then you can see how much space is needed for the SATA ports.

C
Coring_
Junior Member
12
11-17-2022, 10:57 AM
#14
It depends on your situation. I used a TT AH T600 with two side-mounted options, though 30cm is a bit excessive.
C
Coring_
11-17-2022, 10:57 AM #14

It depends on your situation. I used a TT AH T600 with two side-mounted options, though 30cm is a bit excessive.

T
TheYoanZ
Member
156
11-17-2022, 10:57 AM
#15
Hey everyone! It's been a while. I finally got the card onto the motherboard. The key was positioning the case sideways and letting gravity help. It was tough, so I'm hoping I won't have to take it off anytime soon. Unfortunately, the card's heat is affecting my case temperatures, and I've had a strange airflow issue with my Inwin 509 that hasn't been resolved before. I think I'll need to tackle that later. For now, thanks for all the support!
T
TheYoanZ
11-17-2022, 10:57 AM #15

Hey everyone! It's been a while. I finally got the card onto the motherboard. The key was positioning the case sideways and letting gravity help. It was tough, so I'm hoping I won't have to take it off anytime soon. Unfortunately, the card's heat is affecting my case temperatures, and I've had a strange airflow issue with my Inwin 509 that hasn't been resolved before. I think I'll need to tackle that later. For now, thanks for all the support!

Pages (2): Previous 1 2