F5F Stay Refreshed Hardware Desktop The red CPU indicator is illuminated, but your monitor shows a black screen with "no signal."

The red CPU indicator is illuminated, but your monitor shows a black screen with "no signal."

The red CPU indicator is illuminated, but your monitor shows a black screen with "no signal."

M
Markxsman
Member
177
08-27-2021, 01:19 PM
#1
Hey, just finished assembling my PC and everything functioned smoothly after powering it up. However, the CPU debug light is lit and the monitor shows a connection issue. I tried updating the BIOS via the flash button, reseated the RAM and CPU, but nothing changed. Could you help me with this SPECS: Intel Core i7-12700K, MSI Z690 Edge WiFi, DDR4 1600 MHz?
M
Markxsman
08-27-2021, 01:19 PM #1

Hey, just finished assembling my PC and everything functioned smoothly after powering it up. However, the CPU debug light is lit and the monitor shows a connection issue. I tried updating the BIOS via the flash button, reseated the RAM and CPU, but nothing changed. Could you help me with this SPECS: Intel Core i7-12700K, MSI Z690 Edge WiFi, DDR4 1600 MHz?

D
DeMoMisTy
Member
173
08-28-2021, 05:38 PM
#2
Did you manage to activate the BIOS? Can you receive a POST after removing the discrete GPU from your setup? You should be able to access the display through your motherboard because the CPU includes an integrated graphics unit. It might be helpful to check the CPU socket on the motherboard for any bent or damaged pins.
D
DeMoMisTy
08-28-2021, 05:38 PM #2

Did you manage to activate the BIOS? Can you receive a POST after removing the discrete GPU from your setup? You should be able to access the display through your motherboard because the CPU includes an integrated graphics unit. It might be helpful to check the CPU socket on the motherboard for any bent or damaged pins.

D
DJRiep
Member
151
08-28-2021, 08:51 PM
#3
Remove all components from the board. Place the CPU, RAM, and PSU externally. Verify that EPS/CPU connectors and 24-pin connectors are securely attached.
D
DJRiep
08-28-2021, 08:51 PM #3

Remove all components from the board. Place the CPU, RAM, and PSU externally. Verify that EPS/CPU connectors and 24-pin connectors are securely attached.