the ram was overclocked but the pc is not starting
the ram was overclocked but the pc is not starting
I've been using my prebuilt PC for about a year now and recently discovered the power of overclocking. I increased my 2666 MHz RAM to around 3000 MHz and adjusted the voltage to 1.35V. However, my PC won't boot at all. The screen went black and there was no signal from the monitor. When I connected it to HDMI, which is the one I usually use, there was still no signal. After pressing the power button, nothing happened. Then I held it for a while and the PC shut off completely. Once it turned back on, everything worked normally except for the lack of signal. I moved the cable from the GPU to the motherboard and back, but the issue persisted. Please help!
remove the power cord from the rear of the machine.
gently pull out the nickel size button cell battery, take it out for a few minutes or two, then reinsert it.
this action will restore the CMOS to its standard setting and may allow the computer to restart properly.
remove the power cord from the rear of the machine.
gently pull out the nickel size button cell battery, take it out for a few minutes or two, then reinsert it.
this action will restore the CMOS to its standard setting and may allow the computer to restart properly.