F5F Stay Refreshed Hardware Desktop The PC fails to start beyond the BIOS setup.

The PC fails to start beyond the BIOS setup.

The PC fails to start beyond the BIOS setup.

Pages (2): 1 2 Next
_
66
12-10-2020, 10:53 PM
#1
I recently replaced my MSI cooler and received a new one, but after reinstalling the device I’m stuck on the BIOS screen with a bright yellow boot light. The motherboard seems to detect all plugged-in components during EZ mode on my B550-F, yet it doesn’t recognize a boot drive. I’m almost ready to discard this PC since it’s been a full day of troubleshooting—any suggestions would be greatly appreciated.
_
___dalton___12
12-10-2020, 10:53 PM #1

I recently replaced my MSI cooler and received a new one, but after reinstalling the device I’m stuck on the BIOS screen with a bright yellow boot light. The motherboard seems to detect all plugged-in components during EZ mode on my B550-F, yet it doesn’t recognize a boot drive. I’m almost ready to discard this PC since it’s been a full day of troubleshooting—any suggestions would be greatly appreciated.

E
EGXC_RUNNER
Member
213
12-17-2020, 10:01 AM
#2
1. What are your complete system details?
2. Was the device functioning prior to this issue?
3. Have you attempted a CMOS reset?
4. What steps have you taken thus far?
E
EGXC_RUNNER
12-17-2020, 10:01 AM #2

1. What are your complete system details?
2. Was the device functioning prior to this issue?
3. Have you attempted a CMOS reset?
4. What steps have you taken thus far?

F
FunnyGuy123
Junior Member
32
12-17-2020, 04:28 PM
#3
Ensure all external drives are removed except the system boot drive. This can resolve occasional issues, though the reason isn't always clear.
F
FunnyGuy123
12-17-2020, 04:28 PM #3

Ensure all external drives are removed except the system boot drive. This can resolve occasional issues, though the reason isn't always clear.

I
ice4lunch
Junior Member
37
12-18-2020, 11:12 PM
#4
It seems the cooler might not impact your drive unless it was improperly connected during installation. Consider resetting the CMOS.
I
ice4lunch
12-18-2020, 11:12 PM #4

It seems the cooler might not impact your drive unless it was improperly connected during installation. Consider resetting the CMOS.

A
aurodude
Member
202
12-21-2020, 09:56 PM
#5
Yes, it is an NVMe device.
A
aurodude
12-21-2020, 09:56 PM #5

Yes, it is an NVMe device.

S
summerhills
Member
83
12-21-2020, 10:23 PM
#6
Rog strix 550-F Ryzen 5600x Gigabyte RTX 2070 16 GB DDR4 3000 Corsair vengeance ram 1TB M.2 M.VM (boot drive) 500 GB Kingston SSD 1TB western digital blue HDD It functioned properly before. I sent in my AIO and installed the stock cooler while waiting, it worked then. I removed the battery for five minutes while re-seating the CPU to ensure it cleared. I re-seated the CPU, re-mounted the M.2, tested both RAM sticks individually, unplugged and plugged back in the SATA cables, but it still boots from the M.2.
S
summerhills
12-21-2020, 10:23 PM #6

Rog strix 550-F Ryzen 5600x Gigabyte RTX 2070 16 GB DDR4 3000 Corsair vengeance ram 1TB M.2 M.VM (boot drive) 500 GB Kingston SSD 1TB western digital blue HDD It functioned properly before. I sent in my AIO and installed the stock cooler while waiting, it worked then. I removed the battery for five minutes while re-seating the CPU to ensure it cleared. I re-seated the CPU, re-mounted the M.2, tested both RAM sticks individually, unplugged and plugged back in the SATA cables, but it still boots from the M.2.

M
misiek93
Member
182
01-05-2021, 03:47 AM
#7
You've already rearranged it, but it still isn't being detected as a boot device in EZ mode.
M
misiek93
01-05-2021, 03:47 AM #7

You've already rearranged it, but it still isn't being detected as a boot device in EZ mode.

J
JPFence
Member
70
01-27-2021, 12:39 AM
#8
You might have a problem with the advanced settings or SATA configuration, even though the drive appears in EZ mode. Check the hardware and software configurations to ensure everything is correct.
J
JPFence
01-27-2021, 12:39 AM #8

You might have a problem with the advanced settings or SATA configuration, even though the drive appears in EZ mode. Check the hardware and software configurations to ensure everything is correct.

P
pikkon128
Member
164
01-27-2021, 02:57 AM
#9
No, I haven't installed any operating system yet.
P
pikkon128
01-27-2021, 02:57 AM #9

No, I haven't installed any operating system yet.

R
radiation97
Member
66
02-02-2021, 10:33 AM
#10
I had been using this computer smoothly for the past couple of years, even during the week when I installed the stock cooler, though now it fails to boot into Windows after setting up the AIO.
R
radiation97
02-02-2021, 10:33 AM #10

I had been using this computer smoothly for the past couple of years, even during the week when I installed the stock cooler, though now it fails to boot into Windows after setting up the AIO.

Pages (2): 1 2 Next