The PC fails to power on following removal and reinstallation of the GPU.
The PC fails to power on following removal and reinstallation of the GPU.
Consider removing the CMOS. Verify your power connections on the GPU and the PSU (if modular). Try using a different PCIe slot if your motherboard supports one. Also, make sure all PSU connections are secure and reinsert the RAM. It’s possible something was slightly loose while you were working.
I attempted to reset the CMOS and believe O handled it, though I'm not certain. I only used a screwdriver on the two pins as instructed in the manual. Additionally, during troubleshooting, I noticed no sound coming from my headset (Windows 11), so it might be due to a BIOS issue or a hardware problem.
Disconnecting the GPU and starting with headphones to see if Windows launches, or attempt to connect it to a different port if possible
You've already attempted the change, but it didn't resolve the issue.
You're experiencing issues because the GPU isn't receiving power, which likely causes it to spin up immediately after turning off. Changing PSU cables hasn't resolved the problem, suggesting the power supply might be faulty or incompatible with your setup.
Restore it to its original setup before making changes. That means removing the M.2 drive and reinserting the GPU, then testing again. I’ve noticed faulty drives causing this problem before, so I’d do that first to be safe before diving deeper into troubleshooting.
Sure, I've already checked that. Just to confirm, it was the SSD that seemed faulty before you shared it.
Consider exploring alternative options besides a PC repair shop. Testing your system with a different GPU might provide clarity.