The PC fails to display BIOS information or any other details.

Jelly1233
Member

190

12-10-2016, 11:44 AM

It's working now but the fans aren't spinning. I recall past instability with this board and higher-speed memory. When I press power off, it restarts right away. You might want to check the fans manually or try different power settings.

Jelly1233

12-10-2016, 11:44 AM #1

GetUSom
Member

194

12-23-2016, 08:03 AM

Reset CMOS and verify boot process

GetUSom

12-23-2016, 08:03 AM #2

Reset CMOS and verify boot process

AaronSmarter
Junior Member

12-23-2016, 09:25 AM

Check the power button on the case and see if it works. If not, consider the PSU might be faulty.

AaronSmarter

12-23-2016, 09:25 AM #3

Check the power button on the case and see if it works. If not, consider the PSU might be faulty.

ChibiWolf39
Senior Member

491

12-23-2016, 10:29 AM

CPU, cooler, PSU and one RAM stick (verify slot in manual) Reset BIOS Try restarting again if needed Unplug power button and connect pins carefully using a screwdriver to remove faulty button Check the video if unsure If it works, test gradually and see what happens.

ChibiWolf39

12-23-2016, 10:29 AM #4

POTTER1904
Member

12-23-2016, 06:33 PM

I can't directly link videos for you. However, you can search for the video title along with "link" or "watch now" to access it.

POTTER1904

12-23-2016, 06:33 PM #5

I can't directly link videos for you. However, you can search for the video title along with "link" or "watch now" to access it.

Agman10
Senior Member

690

12-25-2016, 12:26 PM

It seems unclear what you're referring to. Could you provide more details? I'm here to help clarify.

Agman10

12-25-2016, 12:26 PM #6

It seems unclear what you're referring to. Could you provide more details? I'm here to help clarify.

Humhumm
Member

137

01-01-2017, 09:48 PM

I managed to figure it out, the power button isn’t the problem. It’s probably the motherboard.

Humhumm

01-01-2017, 09:48 PM #7

I managed to figure it out, the power button isn’t the problem. It’s probably the motherboard.

_Sherder_
Member

221

01-02-2017, 01:32 AM

I had to take care of the RLS task, which involves removing the two-pin start header and securing the pins. Follow what you did—Linus does it many times if he notices a clip.

_Sherder_

01-02-2017, 01:32 AM #8

I had to take care of the RLS task, which involves removing the two-pin start header and securing the pins. Follow what you did—Linus does it many times if he notices a clip.

orgrath_drii
Junior Member

01-19-2017, 06:46 PM

4:56 ish

orgrath_drii

01-19-2017, 06:46 PM #9

4:56 ish