F5F Stay Refreshed Software PC Gaming The Nova's bench score is significantly lower than expected across all my components.

The Nova's bench score is significantly lower than expected across all my components.

The Nova's bench score is significantly lower than expected across all my components.

A
Aquaman_JLA
Junior Member
44
06-09-2025, 08:19 PM
#1
Scores seem around half of the usual part.
Check the details here: the PC is new with a fresh CPU and GPU. The GSKill 16 GB CL16 RAM is set to the default 2133 MHz memory frequency because the DOCP isn't working.
Please let me know what actions you should try. No other tabs were open besides the two monitors.
I adjusted the bar settings and allowed 4G decoding yesterday—was that a problem?
A
Aquaman_JLA
06-09-2025, 08:19 PM #1

Scores seem around half of the usual part.
Check the details here: the PC is new with a fresh CPU and GPU. The GSKill 16 GB CL16 RAM is set to the default 2133 MHz memory frequency because the DOCP isn't working.
Please let me know what actions you should try. No other tabs were open besides the two monitors.
I adjusted the bar settings and allowed 4G decoding yesterday—was that a problem?

T
toejamdaddy
Member
135
06-16-2025, 08:11 AM
#2
Ensure the content remains cohesive while adjusting the phrasing.
T
toejamdaddy
06-16-2025, 08:11 AM #2

Ensure the content remains cohesive while adjusting the phrasing.

R
Robang592
Senior Member
368
06-17-2025, 01:51 PM
#3
You're experiencing problems with your new PC setup, specifically with the GPU and CPU not functioning properly. Your GSKill 16 GB CL16 RAM is set to the default memory frequency on SPD 2133 due to a DOCP issue. You mentioned resizing the bar and enabling 4G decoding recently. If that's causing problems, you may want to check your current settings. Consider trying to adjust the memory frequency again, but be cautious about affecting boot stability. As an alternative, you could revert to using the older GPU and CPU (Ryzen 3600 and Founders 1070).
R
Robang592
06-17-2025, 01:51 PM #3

You're experiencing problems with your new PC setup, specifically with the GPU and CPU not functioning properly. Your GSKill 16 GB CL16 RAM is set to the default memory frequency on SPD 2133 due to a DOCP issue. You mentioned resizing the bar and enabling 4G decoding recently. If that's causing problems, you may want to check your current settings. Consider trying to adjust the memory frequency again, but be cautious about affecting boot stability. As an alternative, you could revert to using the older GPU and CPU (Ryzen 3600 and Founders 1070).

W
Waxo1993
Member
56
06-17-2025, 09:57 PM
#4
Is your system using the most recent BIOS version? You can configure XMP/DOCP settings based on these specifications.
W
Waxo1993
06-17-2025, 09:57 PM #4

Is your system using the most recent BIOS version? You can configure XMP/DOCP settings based on these specifications.

F
fuckmoner
Member
67
06-17-2025, 10:14 PM
#5
I attempted but did not succeed; manual entry will be necessary. I have another post regarding this, so I plan to follow their advice and try today, making small adjustments.
F
fuckmoner
06-17-2025, 10:14 PM #5

I attempted but did not succeed; manual entry will be necessary. I have another post regarding this, so I plan to follow their advice and try today, making small adjustments.

T
The_Dark_Women
Junior Member
6
06-18-2025, 05:47 AM
#6
BIOS?
T
The_Dark_Women
06-18-2025, 05:47 AM #6

BIOS?