The new system won't start with four RAM modules connected, but works properly with two.
The new system won't start with four RAM modules connected, but works properly with two.
Hello everyone, I just installed a new PC and went all out with it. It runs 4x 16GB Corsair Vengeance DDR5 sticks on an ATX board. Sometimes the system won’t boot—usually the red CPU indicator shows trouble but sometimes it gets through to the boot stage with a green light. I noticed the problem appears only when all four are connected. When I swap two out, it works perfectly. Even after a successful start, if I plug in all four and try to boot again, it still works. Any ideas about why this happens?
Occam’s a sharp point suggests the issue may lie with a faulty memory stick, a defective motherboard slot, or a wiring problem. These are hardware concerns, though. Since it’s a new product, I’m likely still covered under warranty. Did you purchase it from a B&M or online store? This impacts how much hassle it is to return it. It can be quite frustrating, but checking software fixes first is a good idea. If troubleshooting doesn’t help, the parts should become affordable and simple to replace. Assuming the replacement process is difficult, I might begin by running memtest86 overnight to eliminate memory errors. Also, are these four sticks part of one set of four or two separate sets of two?
It seems you're asking about the two different kits and their compatibility. The question also touches on why a 64GB version might be preferred over a 32GB one, suggesting a straightforward purchase option exists.