F5F Stay Refreshed Software Operating Systems The new networking card is no longer functioning properly.

The new networking card is no longer functioning properly.

The new networking card is no longer functioning properly.

I
IPS10
Senior Member
Find
623
01-14-2016, 07:28 AM
#1
I've been trying to fix this problem for hours and I got nothing. Here what I got. Just bought 10g card (intel x550-T1). Put it in my server, installed the drivers from intel website ($ make install). Change the MTU to 9014 ($ ip link set "name" mtu 9014). With all that. It work. I get 10gb from it. transfer files like crazy. The end. Nope. Next day came by. I reboot the server and now its no longer works. The card is working as i did boot to windows and it work fine. Did a few commands to see whats going on and here what I got. $ /sbin/modinfo ixgbe | grep version version: 5.7.1 srcversion: 720A79B0425CF0E9E12CB84 $ sudo lshw -class network *-network UNCLAIMED description: Ethernet controller product: Ethernet Controller 10G X550T vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress cap_list configuration: latency=0 resources: memory:a2400000-a27fffff memory:a2800000-a2803fff memory:a2b00000-a2b7ffff memory:a2b80000-a2c7ffff memory:a2c80000-a2d7ffff *-network description: Ethernet interface product: Ethernet Connection (7) I219-V vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 logical name: eno1 version: 10 serial: 04:d9:f5:1c:c9:e2 size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.5-4 ip=10.0.0.79 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:130 memory:a4600000-a461ffff $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 04:d9:f5:1c:c9:e2 brd ff:ff:ff:ff:ff:ff inet 10.0.0.79/24 brd 10.0.0.255 scope global dynamic noprefixroute eno1 valid_lft 601582sec preferred_lft 601582sec inet6 2601:2c7:9000:1ca0::92d2/128 scope global dynamic noprefixroute valid_lft 601583sec preferred_lft 601583sec inet6 2601:2c7:9000:1ca0:2d20:d890:2e27:29a3/64 scope global temporary dynamic valid_lft 206048sec preferred_lft 82761sec inet6 2601:2c7:9000:1ca0:c4d2:e05c:a976:c647/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 206048sec preferred_lft 206048sec inet6 fe80::4ad4:9dea:ae69:e89b/64 scope link noprefixroute valid_lft forever preferred_lft forever It seem like the network card is "unclaimed" and has no logical name. try to use modprobe but got an error. $ modprobe ixgbe modprobe: ERROR: could not insert 'ixgbe': Operation not permitted
Reply
Reply
I
IPS10
01-14-2016, 07:28 AM #1

I've been trying to fix this problem for hours and I got nothing. Here what I got. Just bought 10g card (intel x550-T1). Put it in my server, installed the drivers from intel website ($ make install). Change the MTU to 9014 ($ ip link set "name" mtu 9014). With all that. It work. I get 10gb from it. transfer files like crazy. The end. Nope. Next day came by. I reboot the server and now its no longer works. The card is working as i did boot to windows and it work fine. Did a few commands to see whats going on and here what I got. $ /sbin/modinfo ixgbe | grep version version: 5.7.1 srcversion: 720A79B0425CF0E9E12CB84 $ sudo lshw -class network *-network UNCLAIMED description: Ethernet controller product: Ethernet Controller 10G X550T vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress cap_list configuration: latency=0 resources: memory:a2400000-a27fffff memory:a2800000-a2803fff memory:a2b00000-a2b7ffff memory:a2b80000-a2c7ffff memory:a2c80000-a2d7ffff *-network description: Ethernet interface product: Ethernet Connection (7) I219-V vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 logical name: eno1 version: 10 serial: 04:d9:f5:1c:c9:e2 size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.5-4 ip=10.0.0.79 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:130 memory:a4600000-a461ffff $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 04:d9:f5:1c:c9:e2 brd ff:ff:ff:ff:ff:ff inet 10.0.0.79/24 brd 10.0.0.255 scope global dynamic noprefixroute eno1 valid_lft 601582sec preferred_lft 601582sec inet6 2601:2c7:9000:1ca0::92d2/128 scope global dynamic noprefixroute valid_lft 601583sec preferred_lft 601583sec inet6 2601:2c7:9000:1ca0:2d20:d890:2e27:29a3/64 scope global temporary dynamic valid_lft 206048sec preferred_lft 82761sec inet6 2601:2c7:9000:1ca0:c4d2:e05c:a976:c647/64 scope global dynamic mngtmpaddr noprefixroute valid_lft 206048sec preferred_lft 206048sec inet6 fe80::4ad4:9dea:ae69:e89b/64 scope link noprefixroute valid_lft forever preferred_lft forever It seem like the network card is "unclaimed" and has no logical name. try to use modprobe but got an error. $ modprobe ixgbe modprobe: ERROR: could not insert 'ixgbe': Operation not permitted

Reply
Reply