The new board has built-in Wi-Fi problems.
The new board has built-in Wi-Fi problems.
So yesterday I finally finished assembling my PC and everything is working perfectly. I’m really happy now. But then the screen turned on and loaded my profile, and suddenly I got two pop-up messages. The first one said something about Aisuite3 not responding properly, with a big red cross and details like ProgID and service issues. The second one was about Dipawaymode, also showing a red cross and similar error info. On top of that, my PC doesn’t show any Wi-Fi option—only Ethernet. I checked the BIOS but didn’t find anything related to the Wi-Fi problem.
Here’s what these errors likely mean:
- The first message points to a software or service issue with Aisuite3, possibly blocking startup or control requests.
- The second suggests a problem with the fan control service (Dipawaymode), which might be preventing Wi-Fi setup.
To fix this, I’d probably need to:
1. Restart the PC and ensure all components are properly connected.
2. Check if the Aisuite3 service is running correctly or try restarting it.
3. Verify that the fan control service is functioning (Dipawaymode).
4. Make sure Wi-Fi drivers are updated and the correct network settings are applied.
5. If the issue persists, consider resetting BIOS settings or consulting a technician.
Let me know if you need help with any specific step!
For the Wi-Fi, you'll probably have to install the corresponding driver. If you can't connect an Ethernet cable to the PC right now, you might need to use another computer to download the driver and then move it to your new machine. Concerning the other problems, I'm confident someone more experienced will be able to help.
I managed to get the Wi-Fi up and running fine, but now I’m stuck with just browsing the internet and my whole PC freezes. I’m confused and worried. I have a project due for a non-profit organization that supports kids on the 22nd, and without a functioning computer it’s a disaster. There aren’t any error messages, it doesn’t crash, but it just stops working completely. When I try to open Windows and restart, it takes about 20 minutes with the spinning wheel saying it’s restarting, then it shows a blue screen saying something went wrong and restarts on its own. What’s happening?
Check your RAM model against Gigabyte’s database. It appears CMH64GX5M2B6400C32 isn’t listed there, which could mean a compatibility problem or it might not be relevant to your setup. Review the Gigabyte page for more details and download the appropriate drivers.
Everything is working perfectly and I got the ram sorted! Thank you for all your help and sorry for the extreme delay with the reply (lots of things going on lately). I ended up going back to Microcenter and swapping out my ram to G. Skill F5-6400J3239G32GX2-TZ5RK (after looking and seeing that it is supported). Now that things have calmed down, I got my pc working, and I finished the project which turned out amazing, I wanted to know where I should go for some overclocking questions. I'm not looking to do anything crazy but I am a little curious and have never done that before. To be specific, I have been playing Monster Hunter Wilds and absolutely loving it. That said, there are moments where the game lags and freezes a bit. Never too long to be concerning and it never crashes my system. However, I am wanting to know if there is anything that I can do to get a bit more power from all my stuff. Again, nothing to wild but ideally balancing power and reliability.