The motherboard isn't storing the custom settings.

Zakenshi
Junior Member

01-30-2021, 09:20 PM

You're facing issues where your friend's Athlon 3000g with an Asrock B450m-Pro4 BIOS version 3.40 keeps booting into a reset after overclocking or enabling XMP. It sounds like the hardware might be damaged or misconfigured. Double-check the BIOS settings, ensure the RAM is properly seated, and verify that the system isn't experiencing overheating or power issues. If the problem persists, it could indicate a faulty motherboard or chipset.

Zakenshi

01-30-2021, 09:20 PM #1

blurrysmolbean
Junior Member

01-31-2021, 10:34 PM

No, the CMOS battery is not low.

blurrysmolbean

01-31-2021, 10:34 PM #2

No, the CMOS battery is not low.

skyhawk123
Junior Member

02-01-2021, 05:33 AM

I thought there could be a problem, and I intend to fix it, though I'm not certain.

skyhawk123

02-01-2021, 05:33 AM #3

I thought there could be a problem, and I intend to fix it, though I'm not certain.

dasfuss
Member

156

02-01-2021, 07:26 AM

I've faced some issues with low CMOS batteries before. It doesn't seem like a major concern, though—I tend to deal with other unusual tech problems.

dasfuss

02-01-2021, 07:26 AM #4

I've faced some issues with low CMOS batteries before. It doesn't seem like a major concern, though—I tend to deal with other unusual tech problems.

Suicide_Senpai
Member

108

02-01-2021, 07:33 AM

He often leaves his computer on the ground and doesn’t maintain it regularly.

Suicide_Senpai

02-01-2021, 07:33 AM #5

He often leaves his computer on the ground and doesn’t maintain it regularly.

SW_kail
Member

02-02-2021, 11:51 AM

It runs low because the system uses power for a short time before shutting down, and the boot sequence is stored. That’s likely the standard setting.

SW_kail

02-02-2021, 11:51 AM #6

It runs low because the system uses power for a short time before shutting down, and the boot sequence is stored. That’s likely the standard setting.

EnderPearl5678
Member

128

02-03-2021, 08:54 PM

I don’t understand. As mentioned, I’m dealing with some odd tech issues.

EnderPearl5678

02-03-2021, 08:54 PM #7

I don’t understand. As mentioned, I’m dealing with some odd tech issues.

DatBurrr
Member

02-04-2021, 01:55 AM

I might have found a solution, chapter 2.5 of the motherboard manual, apparently there is a clear cmos jumper, I probably haven't removed it, so I have the answer, I'm retarded.

DatBurrr

02-04-2021, 01:55 AM #8

I might have found a solution, chapter 2.5 of the motherboard manual, apparently there is a clear cmos jumper, I probably haven't removed it, so I have the answer, I'm retarded.

Paray
Junior Member

02-04-2021, 07:31 AM

You've received your one-month membership to the Dum Dum Club. Welcome!

Paray

02-04-2021, 07:31 AM #9

You've received your one-month membership to the Dum Dum Club. Welcome!

Kim_Namjoon
Member

02-04-2021, 02:46 PM

#10

Thanks

Kim_Namjoon

02-04-2021, 02:46 PM #10

Thanks