The motherboard is reinitializing your RAM latency configurations to the default state.

F5F Stay Refreshed Hardware Desktop The motherboard is reinitializing your RAM latency configurations to the default state.

gxdlike
Member

03-29-2023, 01:29 AM

Your system is resetting the RAM latency setting back to default after a restart. Try adjusting the settings manually or checking if the BIOS has any persistent changes that need resetting.

gxdlike

03-29-2023, 01:29 AM #1

Your system is resetting the RAM latency setting back to default after a restart. Try adjusting the settings manually or checking if the BIOS has any persistent changes that need resetting.

solaplexHD
Member

04-02-2023, 02:28 AM

they likely aren't stable timing values. the adjustments were made to address that issue.

solaplexHD

04-02-2023, 02:28 AM #2

they likely aren't stable timing values. the adjustments were made to address that issue.

gdog557
Member

218

04-03-2023, 08:40 PM

16-18-18-36 through multiple variations listed several times. Voltage level is 1.4V.

gdog557

04-03-2023, 08:40 PM #3

16-18-18-36 through multiple variations listed several times. Voltage level is 1.4V.

starwarsTP
Member

04-03-2023, 09:11 PM

Get trapped in the RAM configuration options. Question if your selections really offer any real improvement. Try XMP for consistent performance.

starwarsTP

04-03-2023, 09:11 PM #4

Get trapped in the RAM configuration options. Question if your selections really offer any real improvement. Try XMP for consistent performance.

xSudden
Member

228

04-15-2023, 03:54 AM

However, I've already increased it to 3200MHz and it functions properly.

xSudden

04-15-2023, 03:54 AM #5

However, I've already increased it to 3200MHz and it functions properly.

Seedydoge
Junior Member

04-16-2023, 07:03 PM

Reset the CMOS to confirm if the BIOS is the issue, not a hardware fault.

Seedydoge

04-16-2023, 07:03 PM #6

Reset the CMOS to confirm if the BIOS is the issue, not a hardware fault.

Brudora
Senior Member

726

04-24-2023, 04:13 PM

We learned through observation. It would have been better to mention this earlier. The system ran smoothly at 3200Mhz before adjusting for delays.

Brudora

04-24-2023, 04:13 PM #7

We learned through observation. It would have been better to mention this earlier. The system ran smoothly at 3200Mhz before adjusting for delays.

fluffaluffacis
Junior Member

04-24-2023, 05:01 PM

Have you turned off gear down mode? It only functions with even timing, not odd.

fluffaluffacis

04-24-2023, 05:01 PM #8

Have you turned off gear down mode? It only functions with even timing, not odd.

MVLHM
Member

04-24-2023, 09:09 PM

Use Ryzen Dram Calculator for optimal settings

MVLHM

04-24-2023, 09:09 PM #9

Use Ryzen Dram Calculator for optimal settings

darkspeed002
Member

143

04-25-2023, 09:44 AM

#10

I've tried it before, but it displays incorrect timing values and a clock (3600mhz with 15-14-14-35).

darkspeed002

04-25-2023, 09:44 AM #10

I've tried it before, but it displays incorrect timing values and a clock (3600mhz with 15-14-14-35).