F5F Stay Refreshed Hardware Desktop The latest construction faces a peculiar problem.

The latest construction faces a peculiar problem.

The latest construction faces a peculiar problem.

Pages (3): Previous 1 2 3 Next
M
Mequasta
Junior Member
35
01-31-2023, 10:26 PM
#11
It's sitting inside the motherboard case.
Reply
Reply
M
Mequasta
01-31-2023, 10:26 PM #11

It's sitting inside the motherboard case.

Reply
Reply
D
duhazneubin
Senior Member
583
02-08-2023, 04:02 PM
#12
You might want to stop forcing the flash bios button. Begin by taking out the GPU and leaving only one RAM stick. Also, take out and reinsert the CMOS battery. Then go through the same steps again—turn off the PSU, then turn it back on, and adjust the bridge power switch pins.
Reply
Reply
D
duhazneubin
02-08-2023, 04:02 PM #12

You might want to stop forcing the flash bios button. Begin by taking out the GPU and leaving only one RAM stick. Also, take out and reinsert the CMOS battery. Then go through the same steps again—turn off the PSU, then turn it back on, and adjust the bridge power switch pins.

Reply
Reply
L
LorrenK
Senior Member
703
02-09-2023, 04:09 AM
#13
She has three images of her.
Reply
Reply
L
LorrenK
02-09-2023, 04:09 AM #13

She has three images of her.

Reply
Reply
2
21sprinter
Junior Member
42
02-10-2023, 04:33 PM
#14
Completed, but let's see
Reply
Reply
2
21sprinter
02-10-2023, 04:33 PM #14

Completed, but let's see

Reply
Reply
B
BooperDoope
Member
79
02-18-2023, 03:17 PM
#15
Disconnect all power sources and reattach them. Change the RAM module to another slot and install it in a different position. Inspect the connections on the monitor.
Reply
Reply
B
BooperDoope
02-18-2023, 03:17 PM #15

Disconnect all power sources and reattach them. Change the RAM module to another slot and install it in a different position. Inspect the connections on the monitor.

Reply
Reply
A
alerabbit
Posting Freak
840
02-21-2023, 07:21 AM
#16
No, the two pins were shortened. You linked the HDMI cable to the motherboard after removing the GPU. Edited February 14, 2024 by leclod
Reply
Reply
A
alerabbit
02-21-2023, 07:21 AM #16

No, the two pins were shortened. You linked the HDMI cable to the motherboard after removing the GPU. Edited February 14, 2024 by leclod

Reply
Reply
C
ColdVictory
Junior Member
17
03-04-2023, 06:30 PM
#17
Restored connections, cleared out all but the motherboard and CPU cables, swapped the RAM. No issues. The monitor followed suit.
Reply
Reply
C
ColdVictory
03-04-2023, 06:30 PM #17

Restored connections, cleared out all but the motherboard and CPU cables, swapped the RAM. No issues. The monitor followed suit.

Reply
Reply
B
bonbons_2003
Junior Member
49
03-08-2023, 08:24 PM
#18
Proceed with repositioning the processor. During the process, ensure no solder joints are damaged.
Reply
Reply
B
bonbons_2003
03-08-2023, 08:24 PM #18

Proceed with repositioning the processor. During the process, ensure no solder joints are damaged.

Reply
Reply
I
iSurvive
Member
180
03-08-2023, 09:07 PM
#19
WAHEY, SOMETHING HAPPENED! I was indeed shorting the wrong pins. Fanspin exists, but there's a red light under dram
Reply
Reply
I
iSurvive
03-08-2023, 09:07 PM #19

WAHEY, SOMETHING HAPPENED! I was indeed shorting the wrong pins. Fanspin exists, but there's a red light under dram

Reply
Reply
A
Athenita
Member
164
03-09-2023, 01:29 PM
#20
I put it back in place some time ago once the problem began. Everything looked fine.
Reply
Reply
A
Athenita
03-09-2023, 01:29 PM #20

I put it back in place some time ago once the problem began. Everything looked fine.

Reply
Reply
Pages (3): Previous 1 2 3 Next