The issue is complicated and took a while to resolve.
The issue is complicated and took a while to resolve.
My Windows 10 experienced some small visual problems. I installed it on a smaller SSD for such situations. After connecting the W10 USB, I wiped the drive and system files (as I thought I should). Initially, it said I couldn't install Windows because of GPT. I managed to get past that. Now, during installation, it quickly reaches the 4th step, restarts, and sends me back to the Windows setup. I can't complete it and reach Windows, so I turned off Legacy mode to try bypassing the auto-load into the installer, but it doesn’t work. This sounds confusing—I haven’t had coffee yet and am typing this from my phone since I don’t have a PC at the moment. I really need some assistance. Thanks.
Are you using this computer? Then the SSD could be the problem. If your BIOS supports secure erase, attempt to wipe the drive there. Also consider disconnecting the hard drive during Windows installation by unplugging the SATA cable.
PCPartPicker List: https://pcpartpicker.com/list/dffzh3
CPU: AMD Ryzen 5 3600X 3.8 GHz 6-Core ($210.00 @ Amazon)
Motherboard: MSI B550-A PRO ATX AM4 ($109.99 @ Newegg)
Memory: Crucial Ballistix 32 GB (2 x 16 GB) DDR4-3200 CL16 ($29.99 @ Amazon)
Storage: SanDisk SSD PLUS 240 GB 2.5" ($29.99 @ Amazon)
Internal Drive: Western Digital Blue 1 TB 3.5" ($39.99 @ Western Digital)
Video Card: MSI GAMING X GeForce GTX 1050 Ti 4 GB ($252.27 @ Amazon)
Case: Fractal Design Meshify C ATX Mid Tower ($99.99 @ B&H)
Power Supply: Corsair CX650M 650 W (80+ Bronze Certified) ($209.95 @ Amazon)
Monitor: MSI Optix G271 27.0" (1920 x 1080, 144 Hz) ($252.27 @ Amazon)
Total: $952.18 (includes shipping, taxes, and discounts)
Data generated by PCPartPicker on 2023-12-12 08:39 EST-0500
You've just set up the new SSD and are still facing the same problem. The system seems to restart through the Windows install process after installation, as if nothing had changed. The only recent adjustment was enabling your TPM module inside the BIOS, but it didn’t affect the current setup. You mentioned this isn’t a typical issue you’ve experienced before.
I solved the problem. It seemed my hot ports were turned off, so I enabled the SATA link to the correct SSD and it was recognized and installed. Thanks for your help!