F5F Stay Refreshed Hardware Desktop The Gigabyte RTX 3060 ti Master RGB Fusion isn't recognizing the detection.

The Gigabyte RTX 3060 ti Master RGB Fusion isn't recognizing the detection.

The Gigabyte RTX 3060 ti Master RGB Fusion isn't recognizing the detection.

I
iDino
Junior Member
20
07-13-2021, 03:28 PM
#1
My RGB Fusion 2.0 won’t launch with any control for my Gigabyte RTX 3060 Ti Master. Details: Windows 11 10.0.22000, CPU Ryzen 5 3600, motherboard B450 Aorus Elite rev 1, BIOS F64a, RAM 2x16 G skill RGB + 2x8 G skill at 2133 MHz. No XMP support on the PSU. Power supply is an EVGA GA 750W unit. Storage includes a WD SN550 500GB NVME SSD and a Seagate Barracuda ST2000DM008 HDD. The GPU used was a Gigabyte GTX 1660 Super (3 fans, not overclocked) before switching to the RTX 3060 Ti Master. More explanation: Initially, after installing, a strange command window appeared that seemed to hide the GPU icon. It was so quick I couldn’t tell if it still recognized my old card or what changed. I’ve uninstalled and reinstalled AORUS engine and RGB Fusion multiple times, updated the BIOS on the GPU, and attempted firmware updates claiming to fix RGB support, but they always fail (see attached photo). When trying to run both cards simultaneously—placing the 3060 Ti in the upper PCIe slot and the GTX 1660 Super in the lower slot—RGB Fusion ignores both. Only when using the GTX 1660 Super in the same bottom slot does it detect it. Consider these options: - Install Windows on a separate drive to check for conflicts - Disable RGB Fusion temporarily to test hardware compatibility - Try booting with minimal drivers and see if issues persist - Follow general troubleshooting steps like checking power delivery and fan speeds Make sure you follow these carefully. Thanks in advance.
I
iDino
07-13-2021, 03:28 PM #1

My RGB Fusion 2.0 won’t launch with any control for my Gigabyte RTX 3060 Ti Master. Details: Windows 11 10.0.22000, CPU Ryzen 5 3600, motherboard B450 Aorus Elite rev 1, BIOS F64a, RAM 2x16 G skill RGB + 2x8 G skill at 2133 MHz. No XMP support on the PSU. Power supply is an EVGA GA 750W unit. Storage includes a WD SN550 500GB NVME SSD and a Seagate Barracuda ST2000DM008 HDD. The GPU used was a Gigabyte GTX 1660 Super (3 fans, not overclocked) before switching to the RTX 3060 Ti Master. More explanation: Initially, after installing, a strange command window appeared that seemed to hide the GPU icon. It was so quick I couldn’t tell if it still recognized my old card or what changed. I’ve uninstalled and reinstalled AORUS engine and RGB Fusion multiple times, updated the BIOS on the GPU, and attempted firmware updates claiming to fix RGB support, but they always fail (see attached photo). When trying to run both cards simultaneously—placing the 3060 Ti in the upper PCIe slot and the GTX 1660 Super in the lower slot—RGB Fusion ignores both. Only when using the GTX 1660 Super in the same bottom slot does it detect it. Consider these options: - Install Windows on a separate drive to check for conflicts - Disable RGB Fusion temporarily to test hardware compatibility - Try booting with minimal drivers and see if issues persist - Follow general troubleshooting steps like checking power delivery and fan speeds Make sure you follow these carefully. Thanks in advance.

S
Shukokai
Member
231
07-17-2021, 01:28 PM
#2
I tried to troubleshoot the issue but ended up completing the remaining maintenance tasks—re-seated the card, replaced a few fans, and reconnected everything. Now it’s working correctly and I was able to upgrade the firmware. That’s quite impressive!
S
Shukokai
07-17-2021, 01:28 PM #2

I tried to troubleshoot the issue but ended up completing the remaining maintenance tasks—re-seated the card, replaced a few fans, and reconnected everything. Now it’s working correctly and I was able to upgrade the firmware. That’s quite impressive!