The device switches on and off for half a second before remaining active.
The device switches on and off for half a second before remaining active.
So thanks for helping already, i'm new here so hello! So long story short My motherboard was dead and i returned it to the factory and got it remanufactured, And it worked! Now 3 days later my pc just freezed, i had to put it off holding the power button. (After booting) And after that i had no signal output anymore+ the fans of the rtx 2080 msi gaming trio X are under full load 100% So after me thinking my grafic card was fried, i removed it and the problem was still there, i tried to plug my hdmi in the motherboard but yea it just crashes or something but the pc does not seem to be in a loop but it just goes off for less then a second but it stays on. I have never encountered something like this, any help is welcome, thanks in regards Jack 20200327_002037_1_1.mp4
Just completed the CMOS reset and now it's a regular startup issue. Same as with my motherboard when I took it to the factory. I'm going to log this and try removing one RAM stick to check if that resolves the problem. Current setup: PSU: cooler master mwe gold 750, GPU: MSI GeForce RTX 2080 GAMING X TRIO, CPU: Intel Core i7 9700K, Motherboard: Gigabyte Z390, RAM: AORUS PRO WIFI, SSD: G.Skill DDR4 Trident-Z 2x8GB 3600MHz, SSD: Samsung 970 EVO Plus 1TB M.2. After recording, it still crashes while running. I plan to reinstall the RAM stick to see if it powers off properly. It didn<|pad|>, video not uploaded yet, so please watch and let me know if the motherboard is still damaged. Thanks, Jack 20200327_192720_1.mp4
The system is within the last year and has never been used for overclocking. I had to put in a CPU cooler (bought a replacement) the first time the motherboard got damaged, then returned it to the factory. After three days of use, it’s still facing a similar issue, so I sent it in for remanufacturing.
I just connected everything except the HDMI, it was booting normally but no signal. I have the same PSU from my previous build and will switch it over soon. Will reply with an answer within an hour.
Just for the quote, if you're still interested in this concept.
What is the power rating of this PSU? Also, confirm whether the switch on the back is set to "1" or "on."