The DDR4 2400MHZ (stock) model ran successfully up to 3200MHZ, but assistance is required.
The DDR4 2400MHZ (stock) model ran successfully up to 3200MHZ, but assistance is required.
Hello, I upgraded my Hyper X Fury 2x4 GB RAM to 2933 with the same timing (15-15-15-34) and voltage of 1.2V using the same settings. I ran Memtest86 and found no errors. I’m curious if it’s normal that the CPU appears blank next to DC mode in CPU-Z, indicating dual channel is functioning properly. Could you confirm if everything looks correct?
The empty slot is typical and doesn't require worry. Assuming stability at these OC speeds means proceed. Have you tested the system under full load before?
Not yet relying on the cpu at this clock for several months now, it's stable but regarding ram I'm unsure—I just ran memtest86 for an hour and a half and it worked fine. I plan to increase it to 3200MHZ soon and then begin testing the whole system. I've already tested the full system at 2400MHz.
thanks, i sensed something was off. also, i kept missing the timing settings—i’ll make sure to adjust them now.