The Cooler Master Eisberg 240L Prestige fan is showing signs of instability.
The Cooler Master Eisberg 240L Prestige fan is showing signs of instability.
I purchased the Cooler Master Eisberg 240L Prestige about six months ago, and only recently decided to install it in my computer. While examining the components that came with it, I observed an unusual issue with the fans.
One fan operated normally, whereas the other seemed poorly secured. When I gently tried to spin the normal fan with my finger, it spun as expected. However, attempting to rotate the problematic fan caused it to drop and stop almost immediately.
Upon closer examination, the blades appeared to be detaching easily from the motor. I removed them and inspected the interior. From what I could deduce, the fan mechanism relies on magnets attached to the motor that spin when activated. The normal fan seems to be firmly fixed to the motor, much more so than if it were simply a magnet. In contrast, the other fan appears to be tightly bound, causing it to wobble and move very little.
I plan to use superglue (not hot glue) on the loose area around the magnet to secure both the blades and the motor. Nevertheless, I want to confirm whether this approach is the correct solution.
If you need visual evidence, please let me know and I’ll provide them.
Extra question: Given that my water cooler uses two fans, do you think it would still function properly with only one fan?
TheSonikku :
I purchased the Cooler Master Eisberg 240L Prestige about six months ago, but only recently decided to install it in my computer. While reviewing the components that came with it, I observed an unusual issue with the fans.
One fan operated normally, while the other seemed poorly connected. When I tried to spin the regular fan with my finger, it spun smoothly, just like a typical fan. However, attempting to move the faulty fan caused it to drop and stop almost immediately.
Upon closer examination, the blades were easily detaching from the motor. I removed them and inspected the interior. From what I could deduce, the fan functions by using a magnet to attach the blades to the motor, which spins when the fan is activated.
TheSonikku :
I purchased the Cooler Master Eisberg 240L Prestige about six months ago, and only recently decided to install it in my computer. While examining the components that came with it, I observed an unusual issue with the fans. One fan operated normally, whereas the other seemed poorly connected. If I gently spun the regular fan with my finger, it spun smoothly, just like a typical fan. But attempting to spin the other fan caused it to drop almost instantly and stop. Upon closer examination, the blades were easily detaching from the actual fan. I removed them and inspected the interior.
From what I could deduce, the fan mechanism relies on magnets securing the blades to the motor, allowing rotation when powered on. However, the regular fan appears to be tightly fixed to the motor, much more so than a simple magnet would suggest. Since I wasn’t sure whether to open the fan to confirm, I’m uncertain. The other fan has its blades almost stuck to the motor and wobbles easily. I intend to apply superglue (not hot glue) around the area near the magnet—where it’s still loose—to securely attach both the blades and the motor.
If you need visuals, let me know and I’ll try to send them.
Extra question: With my water cooler using two fans, do I really need both for optimal performance? What would happen if I used just one fan?
Yeah, I'm proably going to end up buying another fan. After about 12-16 hours of searching I found that out.
Extra extra question:
Is it bad to use 2 different fans? Because either I buy another, completely different fan right now, buy two of the completely different fans or wait 6 more months to get myself the same fan as the one that came with the cooler.
TheSonikku :
I think I’ll probably have to buy another fan eventually. After searching for about 12 to 16 hours, I figured it out.
Extra question:
Should I use two different fans? Or should I wait a few more months before getting the same one as the one that came with the cooler?
It’s not a bad idea at all. You might even discover another fan that pulls more air than the original model, which could help keep the GPU cooler.
LogicalProcessing :
TheSonikku :
I think I’ll probably have to buy another fan eventually. After searching for about 12 to 16 hours, I figured it out.
Extra extra question:
Should I use two different fans? Either I buy another completely different one right now, or wait six more months to get the same model as the one that came with the cooler.
It’s not a bad idea at all. You might even discover that another fan draws more air than the original one, which could help keep the GPU cooler.
I guess. But will the difference in airflow affect the cooler negatively?
TheSonikku :
LogicalProcessing :
I think I’ll probably have to buy another fan eventually. After searching for about 12 to 16 hours, I figured that out.
Extra question:
Should I use two different fans? Or should I wait a few more months before getting the same model as the one that came with the cooler?
It’s not really a problem. You might even discover that another fan draws more air than the original one, which could help keep the GPU cooler.
I suppose so, but it might affect the cooler’s performance if it doesn’t match the stock one.
LogicalProcessing :
TheSonikku :
LogicalProcessing :
Yeah, I think I’ll probably purchase another fan. After about 12-16 hours of searching, I figured it out.
Extra question:
Should I use two different fans? Because either I buy another completely different one right now, buy two totally different models, or wait six more months to get the same fan that came with the cooler.
It’s not a bad idea at all. You might even discover that another fan draws more air than the original (which could help cool the GPU better).
I suppose so. But will the difference in airflow affect the cooler negatively?
I don’t see why it would be a problem unless the one I get doesn’t perform as well as the stock one.
Ok, I’ve decided to go for a fan with 1600+ RPM to replace the broken one (the original had 1600 RPM).
Thanks!