F5F Stay Refreshed Hardware Desktop The computer illumination flickers briefly before shutting off.

The computer illumination flickers briefly before shutting off.

The computer illumination flickers briefly before shutting off.

C
Crao
Member
61
06-07-2016, 12:11 AM
#1
I removed my RAM yet it’s back in place. Checked my power supply, attempted troubleshooting. Disconnected the SSD, front panel connectors, but nothing functions. Monitor and mouse lights still work. PC is connected to the wall outlet.
C
Crao
06-07-2016, 12:11 AM #1

I removed my RAM yet it’s back in place. Checked my power supply, attempted troubleshooting. Disconnected the SSD, front panel connectors, but nothing functions. Monitor and mouse lights still work. PC is connected to the wall outlet.

A
AniolElMejor
Member
51
06-07-2016, 06:29 AM
#2
Start with the essentials only. Strip away all components except the bare minimum needed to get the system running. Check if the display connects to the built-in video and if the system responds in BIOS. This works without needing an SSD or graphics card. If it powers up briefly then shuts off, there’s likely a power issue.
A
AniolElMejor
06-07-2016, 06:29 AM #2

Start with the essentials only. Strip away all components except the bare minimum needed to get the system running. Check if the display connects to the built-in video and if the system responds in BIOS. This works without needing an SSD or graphics card. If it powers up briefly then shuts off, there’s likely a power issue.

G
Guapa57
Junior Member
7
06-07-2016, 07:19 AM
#3
Also consider using various RAM slots besides the standard sticks. Adjust your setup as needed; a video card might be necessary if the CPU lacks built-in graphics, though we don't have specific details. Clarify how you're powering the system and check the power supply connection.
G
Guapa57
06-07-2016, 07:19 AM #3

Also consider using various RAM slots besides the standard sticks. Adjust your setup as needed; a video card might be necessary if the CPU lacks built-in graphics, though we don't have specific details. Clarify how you're powering the system and check the power supply connection.

S
Shardgale
Senior Member
547
06-12-2016, 06:08 PM
#4
The computer has functioned well throughout the year, constructed it last season, and completed it this one. I’ve made sure to update my GeForce drivers. It finished successfully. After a short break, I returned and powered it back on. I’ve been flipping the power supply switch and voltage control in hopes something might improve.
S
Shardgale
06-12-2016, 06:08 PM #4

The computer has functioned well throughout the year, constructed it last season, and completed it this one. I’ve made sure to update my GeForce drivers. It finished successfully. After a short break, I returned and powered it back on. I’ve been flipping the power supply switch and voltage control in hopes something might improve.

S
shadowgtr
Member
222
06-14-2016, 07:57 AM
#5
Memory: two DDR4 modules
Graphics: GTX 1660
Processor: i7-11700
RAM: 2 sticks DDR4
GPU: GTX 1660
S
shadowgtr
06-14-2016, 07:57 AM #5

Memory: two DDR4 modules
Graphics: GTX 1660
Processor: i7-11700
RAM: 2 sticks DDR4
GPU: GTX 1660

S
STEVENS15
Member
144
06-25-2016, 12:53 PM
#6
Don’t change the voltage switch unless you’re risking damage. Just confirm it’s in the correct position. Are you aiming to power it up or are you also pressing the PC power button? Have you rearranged the RAM? Since the CPU includes an integrated graphics, try removing the 1660 and connect the video cable to the motherboard to test. Have you attempted to reset CMOS? Also, could you explain how you checked the PSU before trying this?
S
STEVENS15
06-25-2016, 12:53 PM #6

Don’t change the voltage switch unless you’re risking damage. Just confirm it’s in the correct position. Are you aiming to power it up or are you also pressing the PC power button? Have you rearranged the RAM? Since the CPU includes an integrated graphics, try removing the 1660 and connect the video cable to the motherboard to test. Have you attempted to reset CMOS? Also, could you explain how you checked the PSU before trying this?

O
owen22s
Member
70
06-26-2016, 01:05 PM
#7
I'm turning on the power button. I've adjusted the RAM placement and will attempt to connect the video cable to the motherboard. How can I remove the CMOS settings? I also performed the paper clip test.
O
owen22s
06-26-2016, 01:05 PM #7

I'm turning on the power button. I've adjusted the RAM placement and will attempt to connect the video cable to the motherboard. How can I remove the CMOS settings? I also performed the paper clip test.

R
RasierShampoo
Member
216
06-26-2016, 01:21 PM
#8
Are you sure the video cable is the one you connect to your GPU? If it is, you probably shouldn’t try to fit it anywhere on your motherboard unless you’re mistaken. Also, after taking out the motherboard battery, the lights came on and then turned off.
R
RasierShampoo
06-26-2016, 01:21 PM #8

Are you sure the video cable is the one you connect to your GPU? If it is, you probably shouldn’t try to fit it anywhere on your motherboard unless you’re mistaken. Also, after taking out the motherboard battery, the lights came on and then turned off.

V
Verloh
Member
71
06-26-2016, 02:30 PM
#9
Yes, I located a solution. You found a solution!
V
Verloh
06-26-2016, 02:30 PM #9

Yes, I located a solution. You found a solution!