F5F Stay Refreshed Hardware Desktop The accident was quite severe, but everything seems to be under control.

The accident was quite severe, but everything seems to be under control.

The accident was quite severe, but everything seems to be under control.

N
nicksta6
Junior Member
1
06-23-2018, 08:41 PM
#1
I purchased this 9900k used unit and installed it shortly after on the road. Under proper lighting, I can see a trace of the outer circuit on the right side. Is the processor in good condition? Should I look for a protective cover for that trace? Also, is the outer trace merely a shield against interference?
N
nicksta6
06-23-2018, 08:41 PM #1

I purchased this 9900k used unit and installed it shortly after on the road. Under proper lighting, I can see a trace of the outer circuit on the right side. Is the processor in good condition? Should I look for a protective cover for that trace? Also, is the outer trace merely a shield against interference?

E
EnderDocter76
Junior Member
33
06-25-2018, 11:11 AM
#2
Amusing. Insert it onto the screen and test it. Nobody will guess from just a glance at those images.
E
EnderDocter76
06-25-2018, 11:11 AM #2

Amusing. Insert it onto the screen and test it. Nobody will guess from just a glance at those images.

B
BRIZEPLAYS
Junior Member
4
07-01-2018, 09:30 AM
#3
Big deal! From my perspective, the only option is to check it visually and verify it looks normal. If not, you’ll need to run tests. Good luck!
B
BRIZEPLAYS
07-01-2018, 09:30 AM #3

Big deal! From my perspective, the only option is to check it visually and verify it looks normal. If not, you’ll need to run tests. Good luck!

A
augustb19907
Senior Member
456
07-03-2018, 03:24 AM
#4
Yes, I'm connected to Linus. Just plug it in and give it a try!
A
augustb19907
07-03-2018, 03:24 AM #4

Yes, I'm connected to Linus. Just plug it in and give it a try!

S
Saphiregem999
Junior Member
29
07-04-2018, 11:56 PM
#5
Usually, the connections are the key component, making damage the main concern. It's hard to judge if everything is okay just by looking at photos. You'd need to perform a test to determine the status.
S
Saphiregem999
07-04-2018, 11:56 PM #5

Usually, the connections are the key component, making damage the main concern. It's hard to judge if everything is okay just by looking at photos. You'd need to perform a test to determine the status.

M
mcDavoz
Senior Member
544
07-11-2018, 12:21 PM
#6
The damaged section doesn't affect functionality. I'm confident it will operate properly.
M
mcDavoz
07-11-2018, 12:21 PM #6

The damaged section doesn't affect functionality. I'm confident it will operate properly.

S
Sv3tnetS
Member
193
07-12-2018, 04:00 PM
#7
Use a magnifying glass to check for bent pins on the bottom of the CPU. Also, attempt to boot the computer with this CPU. If it fails, consult a local Intel store or similar service. Edited August 4, 2020 by CELERIC07
S
Sv3tnetS
07-12-2018, 04:00 PM #7

Use a magnifying glass to check for bent pins on the bottom of the CPU. Also, attempt to boot the computer with this CPU. If it fails, consult a local Intel store or similar service. Edited August 4, 2020 by CELERIC07

T
techiseasy
Senior Member
688
07-14-2018, 01:36 AM
#8
No bottom pins; use contact pads and a few caps/resistors.
T
techiseasy
07-14-2018, 01:36 AM #8

No bottom pins; use contact pads and a few caps/resistors.

C
cvogt8
Junior Member
43
07-18-2018, 01:23 PM
#9
IK. I misplaced my sentence so it’s conveying the incorrect idea... I used "computer" instead of "CPU" while rushing. I was in an online class when my teacher called, which made me type quickly.
C
cvogt8
07-18-2018, 01:23 PM #9

IK. I misplaced my sentence so it’s conveying the incorrect idea... I used "computer" instead of "CPU" while rushing. I was in an online class when my teacher called, which made me type quickly.

L
Luxa22
Member
82
07-20-2018, 02:20 AM
#10
Looking for advice on the copper strip you notice around the edge of the processor. It might help to check the design specs or consult the manufacturer's documentation for details on the interference shield.
L
Luxa22
07-20-2018, 02:20 AM #10

Looking for advice on the copper strip you notice around the edge of the processor. It might help to check the design specs or consult the manufacturer's documentation for details on the interference shield.