The 4x8 RAM isn't correctly positioned in the motherboard slots.
The 4x8 RAM isn't correctly positioned in the motherboard slots.
Hey there, I see you're having trouble with your B550 Carbon setup. The placement of the RAM modules seems off—those left ones are spaced apart, and the two middle ones are bunched together. This could be due to how the motherboard layout was designed or how the slots were positioned during manufacturing. It might help to double-check your installation steps or consult the official documentation for your board. If you need further guidance, let me know!
There is a reasonable amount of flexibility in the sockets, which can cause memory to shift slightly. Turn off the equipment and realign them. It should work fine. Make sure the connections are fully secured at both ends, and you’ll hear a click twice—sometimes at the same time.
Edited May 12, 2021 by ShrimpBrime
You may need to adjust the LEDs in the desired direction to achieve a uniform, parallel appearance. This issue occurred with Corsair Vengeance RGB Pro sticks. Try moving the middle LEDs outward and observe if the gap improves.
The slot is fixed onto the board. It won't move, so avoid attempting that. Turn off the rig and possibly swap the two middle units with the ends before adjusting them. Align them until they're straight, then power it on. Remember to shut it down first.
They seem distorted due to heat from the heatsinks on the slots, not because they're soldered directly onto the board.