The 3600x update fails to start the system.

Pages (3): 1 2 3 Next

xanderzone317
Posting Freak

957

11-12-2019, 12:59 PM

I owned a Ryzen 5 2600 with an ASRock B450M Pro4 running 3.50 BIOS. I upgraded to a 3600X and changed the BIOS to 3.60, then 3.90 (using only available options). It still won’t boot. I enter BIOS every time and it works, but it freezes at the Windows logo with the spinning loader. Safe mode helps, though I couldn’t install the B450 chipset drivers there either. This is getting frustrating. Got any suggestions? Thanks!

xanderzone317

11-12-2019, 12:59 PM #1

teoyak
Member

11-12-2019, 02:06 PM

Use F8 to boot into selection mode, then press it repeatedly to enter safe mode. Next, attempt "disable driver enforcement" and check if Windows loads. Finally, test the "bootstrap console" option.

teoyak

11-12-2019, 02:06 PM #2

Use F8 to boot into selection mode, then press it repeatedly to enter safe mode. Next, attempt "disable driver enforcement" and check if Windows loads. Finally, test the "bootstrap console" option.

Frez
Junior Member

11-17-2019, 10:19 PM

No such luck, still got a spinning circle under the windows logo

Frez

11-17-2019, 10:19 PM #3

No such luck, still got a spinning circle under the windows logo

_RedStar
Member

171

11-18-2019, 12:11 AM

Yes, the HDD light is on.

_RedStar

11-18-2019, 12:11 AM #4

Yes, the HDD light is on.

Miyuumi
Senior Member

543

11-23-2019, 01:28 AM

Latest notice: Your computer failed to start because a necessary device isn’t connected or reachable. Error code 0xc000000e.

Miyuumi

11-23-2019, 01:28 AM #5

Latest notice: Your computer failed to start because a necessary device isn’t connected or reachable. Error code 0xc000000e.

LuksFX
Member

108

11-24-2019, 05:56 AM

It might be one of the startup drivers. Identify the culprit, enter safe mode, and remove the problematic driver manually.

LuksFX

11-24-2019, 05:56 AM #6

It might be one of the startup drivers. Identify the culprit, enter safe mode, and remove the problematic driver manually.

Colefusion
Senior Member

382

12-05-2019, 10:27 PM

There is a problem with the winders files. Use the USB installation drive to fix your system.

Colefusion

12-05-2019, 10:27 PM #7

There is a problem with the winders files. Use the USB installation drive to fix your system.

Bro76
Member

126

12-10-2019, 07:30 AM

It might have occurred simply by refreshing your motherboard BIOS and adjusting the CPU settings. The Windows setup shouldn't differ much from this.

Bro76

12-10-2019, 07:30 AM #8

It might have occurred simply by refreshing your motherboard BIOS and adjusting the CPU settings. The Windows setup shouldn't differ much from this.

CryoWolf
Junior Member

12-10-2019, 10:37 AM

P A N I C

CryoWolf

12-10-2019, 10:37 AM #9

P A N I C

mousse2006
Member

157

12-13-2019, 02:03 AM

#10

There could be many possible causes, but in short, UEFI and Windows tend to work well together. The CPU driver might need a change, and the chipset driver could require an update. Memory support might have shifted slightly, causing some files to fail. I've seen worse with fewer issues. It's good to be grateful the system still starts after the update. AsRock isn't among the top three out of five options, at least for now.

mousse2006

12-13-2019, 02:03 AM #10

Pages (3): 1 2 3 Next