The 3200Mhz RAM fails to operate above 2400Mhz.

RedKickify
Member

225

08-17-2023, 01:22 PM

You're facing an issue where your RAM only operates at 2400MHz despite being installed in higher timings slots (A2/B2). The BIOS settings don’t override the chip’s default speed, and changing voltages or timings hasn’t resolved the problem. Consider checking the RAM modules for proper installation, ensuring they’re seated correctly, and verifying that the motherboard supports 3200MHz for those slots. If the problem persists, contact AsRock support or consult a professional for further diagnostics.

RedKickify

08-17-2023, 01:22 PM #1

natsu40
Member

239

08-27-2023, 08:09 PM

What voltage did you use?

natsu40

08-27-2023, 08:09 PM #2

What voltage did you use?

_K03N_
Junior Member

08-27-2023, 08:56 PM

Car models 1.35 and 1.45 are not functional.

_K03N_

08-27-2023, 08:56 PM #3

Car models 1.35 and 1.45 are not functional.

_ErikThePanda_
Posting Freak

807

08-27-2023, 09:11 PM

I notice modules timed at 16/18/18, yet not 16/16/16. I’d attempt to set 16/18/18/2T/3200/1.35V and check if it functions. If successful, try adjusting to 16/18/18/1T/3200/1.35V.

_ErikThePanda_

08-27-2023, 09:11 PM #4

I notice modules timed at 16/18/18, yet not 16/16/16. I’d attempt to set 16/18/18/2T/3200/1.35V and check if it functions. If successful, try adjusting to 16/18/18/1T/3200/1.35V.

soccerclay52
Junior Member

08-28-2023, 06:23 PM

16/18/18/2T/3200/1.35V doesn't work, I'm testing 16/18/18/1T/3200/1.35v instead. Both attempts failed.

soccerclay52

08-28-2023, 06:23 PM #5

16/18/18/2T/3200/1.35V doesn't work, I'm testing 16/18/18/1T/3200/1.35v instead. Both attempts failed.

Deeckay
Junior Member

09-09-2023, 06:00 AM

Test 2933 with more precise timing. For the 2000 series Ryzen, anything above 2933 is treated as an overclock. Confirm 2933 functions reliably

Deeckay

09-09-2023, 06:00 AM #6

Test 2933 with more precise timing. For the 2000 series Ryzen, anything above 2933 is treated as an overclock. Confirm 2933 functions reliably

hobbit24
Junior Member

09-10-2023, 11:37 AM

After resetting the BIOS, everything resets back to default with 1.42 DRAM voltage. Anything higher causes another crash. The system fails to boot Windows and shows a blue screen within ten seconds. Are there any adjustments needed?

hobbit24

09-10-2023, 11:37 AM #7

Bebop_DRA
Junior Member

09-12-2023, 09:15 AM

It seems you're facing a tough situation with your device. Maybe you didn't win the silicone draw, and your phone isn't performing well either. Consider running it at 2933 and move on.

Bebop_DRA

09-12-2023, 09:15 AM #8

It seems you're facing a tough situation with your device. Maybe you didn't win the silicone draw, and your phone isn't performing well either. Consider running it at 2933 and move on.

Frankie101
Member

09-13-2023, 05:33 AM

Do you believe the difference between 2933 and 3200 is significant? It seems Ryzen appreciates it, which is why I opted for higher-end "3200MHz" RAM.

Frankie101

09-13-2023, 05:33 AM #9

Do you believe the difference between 2933 and 3200 is significant? It seems Ryzen appreciates it, which is why I opted for higher-end "3200MHz" RAM.

ali_styler
Junior Member

09-13-2023, 09:57 AM

#10

Ryzen prioritizes RAM speed above all else. If performance isn't met, the system won't function. The 3000 series offers superior memory controllers reaching up to 3600 MHz, whereas the 2000 series falls short in this regard.

ali_styler

09-13-2023, 09:57 AM #10