F5F Stay Refreshed Hardware Desktop Temperatures on Ryzen 9 3900X can vary based on workload and cooling.

Temperatures on Ryzen 9 3900X can vary based on workload and cooling.

Temperatures on Ryzen 9 3900X can vary based on workload and cooling.

X
xCre8x
Member
52
12-09-2019, 06:45 AM
#1
I just reinstalled everything, but the computer needed a few restarts afterward. On some of those restarts, the speaker emitted a three-beep sound and the screen displayed an "CPU OVER TEMP ERROR." After all installations, I checked the CPU temperature and it was around 80°C during idle. Is this typical? Should I just reapply thermal paste? I also noticed the original cooler was slightly loose. I haven’t done any overclocking.
X
xCre8x
12-09-2019, 06:45 AM #1

I just reinstalled everything, but the computer needed a few restarts afterward. On some of those restarts, the speaker emitted a three-beep sound and the screen displayed an "CPU OVER TEMP ERROR." After all installations, I checked the CPU temperature and it was around 80°C during idle. Is this typical? Should I just reapply thermal paste? I also noticed the original cooler was slightly loose. I haven’t done any overclocking.

M
masterhamann8
Junior Member
48
12-09-2019, 08:26 AM
#2
Make it cooler, adjust the situation.
M
masterhamann8
12-09-2019, 08:26 AM #2

Make it cooler, adjust the situation.

X
xXfoofieXx
Junior Member
8
12-10-2019, 10:43 PM
#3
If the stock cooler isn’t secure, it may not be properly connecting to the CPU. Contactless cooling is really challenging, particularly for a 3900x model. Seriously, the CPU includes thermal paste—ensure the cooler’s contact plate is fully in touch with the CPU. The cooler shouldn’t be wobbly.
X
xXfoofieXx
12-10-2019, 10:43 PM #3

If the stock cooler isn’t secure, it may not be properly connecting to the CPU. Contactless cooling is really challenging, particularly for a 3900x model. Seriously, the CPU includes thermal paste—ensure the cooler’s contact plate is fully in touch with the CPU. The cooler shouldn’t be wobbly.

R
roadkill872
Junior Member
22
12-14-2019, 09:57 AM
#4
Set the cooler correctly and it will work well.
R
roadkill872
12-14-2019, 09:57 AM #4

Set the cooler correctly and it will work well.

J
joshizcool2003
Junior Member
11
12-14-2019, 04:51 PM
#5
I didn't fully tighten the lever, which caused the sloppiness.
J
joshizcool2003
12-14-2019, 04:51 PM #5

I didn't fully tighten the lever, which caused the sloppiness.